netscaler

Enables Puppet configuration of Citrix NetScaler devices through types and REST-based providers

Module Stats

24,784 downloads

20,548 latest version

4.3 quality score

Support the Puppet Community by contributing to this module

You are welcome to contribute to this module by suggesting new features, currency updates, or fixes. Every contribution is valuable to help ensure that the module remains compatible with the latest Puppet versions and continues to meet community needs. Complete the following steps:

Review the module’s contribution guidelines and any licenses. Ensure that your planned contribution aligns with the author’s standards and any legal requirements.
Fork the repository on GitHub, make changes on a branch of your fork, and submit a pull request. The pull request must clearly document your proposed change.

For questions about updating the module, contact the module’s author.

Version information

released Feb 9th 2016

This version is compatible with:

Puppet Enterprise >= 3.7.0 < 2015.4.0
Puppet >= 3.0.0 < 5.0.0

Start using this module

Installation method

Add this module to your Puppetfile:

mod 'puppetlabs-netscaler', '1.2.0'

Learn more about managing modules with a Puppetfile

Add this module to your Bolt project:

bolt module add puppetlabs-netscaler

Learn more about using this module with an existing project

Manually install this module globally with Puppet module tool:

puppet module install puppetlabs-netscaler --version 1.2.0

Tags: network, loadbalancer, netscaler

Documentation

puppetlabs/netscaler — version 1.2.0 Feb 9th 2016

#netscaler

####Table of Contents

Overview
Module Description - What the module does and why it is useful
Setup - The basics of getting started with netscaler
- Setup requirements
- Beginning with netscaler
Usage - Configuration options and additional functionality
- Set up two load-balanced web servers
- Tips and tricks
Reference - An under-the-hood peek at what the module is doing and how
Limitations - OS compatibility, etc.

##Overview

The netscaler module enables Puppet configuration of Citrix NetScaler devices through types and REST-based providers.

##Module Description

This module uses REST to manage various aspects of NetScaler load balancers, and acts as a foundation for building higher level abstractions within Puppet.

The module allows you to manage NetScaler nodes and pool configuration through Puppet.

##Setup

###Beginning with netscaler

This module uses puppet device instead of puppet agent to manage the devices. The puppet device subcommand interacts with administrative interfaces to implement types and providers. This allows resources to talk to the device and translate the module into network calls.

Before you can use the netscaler module, you must create a proxy system able to run puppet device. In order to do so, you'll need a Puppet master and a Puppet agent as usual, and one node as the "proxy system" for puppet device.

This means you must create a device.conf file in the Puppet conf directory (either /etc/puppet or /etc/puppetlabs/puppet) on the Puppet agent. Within your device.conf, you must have:

[<DEVICE CERTNAME>]
  type netscaler
  url https://<USERNAME>:<PASSWORD>@<IP ADDRESS or FULLY QUALIFIED HOST NAME>/nitro/v1/

In the above example, the username and password must be for a user with superuser privileges (i.e., the NetScaler administrator). The default admin username is 'nsroot'. The certname should be the certname of the NetScaler device.

Additionally, you must install the faraday gem on the proxy host (Puppet agent). You can do this by declaring the netscaler class on that host. If you do not install the faraday gem, the module will not work.

##Usage

###Set up two load-balanced web servers

####Before you begin

This example is built around the following infrastructure: A server running a Puppet master is connected to the NetScaler device. The NetScaler device contains a management VLAN, a client VLAN that contains the virtual server, and a server VLAN that connects to the two web servers the module will be setting up.

In order to successfully set up your web servers, you must know the following information about your systems:

The IP addresses of both of the web servers.
The names of the nodes each web server will be on.
The ports the web servers are listening on.
The IP address of the virtual server.

####Step One: Classifying your device

In your site.pp file, enter the below code:

node 'device certname' {
  netscaler_server { 'server1':
    ensure  => present,
    address => '1.10.1.1',
  }
  netscaler_service { 'service1':
    ensure      => 'present',
    server_name => 'server1',
    port        => '80',
    protocol    => 'HTTP',
    comments    => 'This is a comment'
  }
  netscaler_lbvserver { 'lbvserver1':
    ensure       => 'present',
    service_type => 'HTTP',
    ip_address   => '1.10.1.2',
    port         => '8080',
    state        => true,
  }
  netscaler_lbvserver_service_binding { 'lbvserver1/service1':
    ensure => 'present',
    weight => '100',
  }
  netscaler_rewritepolicy { 'rewritepolicy_test1':
    ensure                  => 'present',
    action                  => 'NOREWRITE',
    comments                => 'comment',
    expression              => 'HTTP.REQ.URL.SUFFIX.EQ("")',
    undefined_result_action => 'DROP',
  }
  netscaler_csvserver { 'csvserver_test1':
    ensure        => 'present',
    service_type  => 'HTTP',
    state         => true,
    ip_address    => '2.4.1.1',
    port          => '8080',
  }
  netscaler_csvserver_rewritepolicy_binding { 'csvserver_test1/rewritepolicy_test1':
    ensure               => present,
    priority             => 1,
    invoke_vserver_label => 'csvserver_test1',
    choose_type          => 'Request',
  }
}

####Step Two: Run puppet device

Run the following to have the proxy node apply your classifications and configure the NetScaler device:

$ puppet device -v --user=root

If you do not run this command, clients will not be able to make requests to the web servers.

At this point, your NetScaler should be ready to handle requests for the web servers.

###Tips and tricks

####Basic usage

Once you've established a basic configuration, you can explore the providers and their allowed options by running puppet resource <TYPENAME> for each type. This will provide a starting point for seeing what's already on your NetScaler. If anything failed to set up properly, it will not show up when you run the command.

Call the types from the proxy system.

$ FACTER_url=https://<USERNAME>:<PASSWORD>@<NETSCALER1.EXAMPLE.COM> puppet resource netscaler_lbvserver

####Roles and profiles

The above example is a proof-of-concept for setting up a simple configuration of two web servers. We recommend using the roles and profiles pattern for anything else.

##Reference

###Public Types

netscaler_csaction
netscaler_cspolicy
netscaler_cspolicylabel
netscaler_cspolicylabel_cspolicy_binding
netscaler_csvserver
netscaler_csvserver_cspolicy_binding
netscaler_csvserver_responderpolicy_binding
netscaler_csvserver_rewritepolicy_binding
netscaler_feature
netscaler_file
netscaler_group_user_binding
netscaler_lbmonitor
netscaler_lbvserver
netscaler_lbvserver_responderpolicy_binding
netscaler_lbvserver_rewritepolicy_binding
netscaler_lbvserver_service_binding
netscaler_nshostname
netscaler_nsip
netscaler_ntpserver
netscaler_ntpsync
netscaler_responderaction
netscaler_responderglobal
netscaler_responderpolicy
netscaler_responderpolicylabel
netscaler_rewriteaction
netscaler_rewriteglobal
netscaler_rewritepolicy
netscaler_rewritepolicylabel
netscaler_route
netscaler_server
netscaler_service
netscaler_servicegroup
netscaler_servicegroup_lbmonitor_binding
netscaler_servicegroup_member
netscaler_service_lbmonitor_binding
netscaler_snmpalarm
netscaler_sslcertfile
netscaler_sslcertkey
netscaler_sslkeyfile
netscaler_sslocsresponder
netscaler_sslvserver
netscaler_user
netscaler_vlan
netscaler_vlan_nsip_binding

###Type: netscaler_csaction

Manages basic NetScaler content switching action objects.

####Parameters

All parameters, except where otherwise noted, are optional. Their default values are determined by your particular NetScaler setup.

#####comments

Any information about the responder action.

#####ensure

The basic state that the resource should be in.

Valid values are 'present', 'absent'.

#####name

Name for the object. Must begin with an ASCII alphabetic or underscore (_) character and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters.

#####target_lb_expression

Information about this content switching action.

#####target_lbvserver

Name of the load balancing virtual server to which the content is switched.

###Type: netscaler_cspolicy

Manages basic NetScaler cs policy objects.

####Parameters

All parameters, except where otherwise noted, are optional. Their default values are determined by your particular NetScaler setup.

#####action

Name of the cs action to perform if the request matches this cs policy.

#####domain

The domain name. The string value can range to 63 characters.

#####ensure

The basic state that the resource should be in.

Valid values are 'present', 'absent'.

#####expression

The expression, or name of a named expression, against which traffic is evaluated. Written in the classic or default syntax.

#####log_action

Name of the messagelog action to use for requests that match this policy.

#####name

Name for the object. Must begin with an ASCII alphabetic or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters.

#####url

URL string that is matched with the URL of a request. Can contain a wildcard character. Specify the string value in the following format: 'prefix.suffix'.

###Type: netscaler_cspolicylabel

Manages basic NetScaler cs action objects.

####Parameters

All parameters, except where otherwise noted, are optional. Their default values are determined by your particular NetScaler setup.

#####ensure

The basic state that the resource should be in.

Valid values are 'present', 'absent'.

#####label_type

Protocol supported by the policy label. All policies bound to the policy label must either match the specified protocol or be a subtype of that protocol. Available settings function as follows:

'HTTP' - Supports policies that process HTTP traffic. Used to access unencrypted Web sites. This is the default setting.
'SSL' - Supports policies that process HTTPS/SSL encrypted traffic. Used to access encrypted Web sites.
'TCP' - Supports policies that process any type of TCP traffic, including HTTP.
'SSL_TCP' - Supports policies that process SSL-encrypted TCP traffic, including SSL.
'UDP' - Supports policies that process any type of UDP-based traffic, including DNS.
'DNS' - Supports policies that process DNS traffic.
'ANY' - Supports all types of policies except HTTP, SSL, and TCP.
'SIP_UDP' - Supports policies that process UDP based Session Initiation Protocol (SIP) traffic. SIP initiates, manages, and terminates multimedia communications sessions, and has emerged as the standard for Internet telephony (VoIP).
'RTSP' - Supports policies that process Real Time Streaming Protocol (RTSP) traffic. RTSP provides delivery of multimedia and other streaming data, such as audio, video, and other types of streamed media.
'RADIUS' - Supports policies that process Remote Authentication Dial In User Service (RADIUS) traffic. RADIUS supports combined authentication, authorization, and auditing services for network management.
'MYSQL' - Supports policies that process MYSQL traffic.
'MSSQL' - Supports policies that process Microsoft SQL traffic.

#####name

###Type: netscaler_cspolicylabel_cspolicy_binding

Manages a binding between a content switching vserver and a content switching policy.

####Parameters

All parameters, except where otherwise noted, are optional. Their default values are determined by your particular NetScaler setup.

#####ensure

The basic state that the resource should be in.

Valid values are 'present', 'absent'.

#####goto_expression

Expression specifying the priority of the next policy that gets evaluated if the current policy rule evaluates to true.

#####invoke_policy_label

Label of policy to invoke if the bound policy evaluates to true.

#####name

The title of the bind resource, composed of the title of the cspolicylabel and the title of the cspolicy: 'cspolicylabel_name/cspolicy_name'.

#####priority

Specifies the priority of the policy. Values can be any integer between 1 and 2147483647.

Min = 1 Max = 2147483647

#####target_lbvserver

The virtual server name to which content will be switched.

###Type: netscaler_csvserver

Manages content switching vserver on the NetScaler appliance.

####Parameters

All parameters, except where otherwise noted, are optional. Their default values are determined by your particular NetScaler setup.

#####appflow_logging

Enable logging appflow flow information.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####authentication

This option toggles on or off the application of authentication of incoming users to the vserver.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####authentication_401

This option toggles on or off the HTTP 401 response based authentication.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####authentication_fqdn

Fully qualified domain name (FQDN) of the authentication virtual server to which the user must be redirected for authentication. Make sure that the Authentication parameter is set to ENABLED.

#####authentication_profile_name

The name of the authentication profile to be used when authentication is turned on.

#####authentication_virtual_server_name

Name of an authentication virtual server with which to authenticate users.

#####backup_virtual_server

Name of the backup virtual server to which to forward requests if the primary virtual server goes DOWN or reaches its spillover threshold.

#####cacheable

The option to specify whether a virtual server used for content switching will route requests to the cache redirection virtual server before sending it to the configured servers.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####case_sensitive

The URL lookup case option on the content switching vserver.

If case sensitivity of a content switching virtual server is set to 'ON', the URLs /a/1.html and /A/1.HTML are treated differently and can have different targets (set by content switching policies).

If case sensitivity is set to 'OFF', the URLs /a/1.html and /A/1.HTML are treated the same and are switched to the same target.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####client_timeout

Client timeout in seconds.

Maximum value: 31536000.

#####comment

Any comments you want to associate with this virtual server.

#####db_profile_name

Name of the DB profile whose settings are to be applied to the virtual server.

#####default_lbvserver

The virtual server name to which content will be switched.

#####disable_primary_on_down

When this argument is enabled, traffic will continue reaching backup vservers even after primary comes UP from DOWN state.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####down_state_flush

Perform delayed clean up of connections on this vserver.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####ensure

The basic state that the resource should be in.

Valid values are 'present', 'absent'.

#####http_profile_name

Name of the HTTP profile whose settings are to be applied to the virtual server.

#####icmp_virtual_server_response

How the NetScaler appliance responds to ping requests received for an IP address that is common to one or more virtual servers. Available settings function as follows:

If set to PASSIVE on all the virtual servers that share the IP address, the appliance always responds to the ping requests.
If set to ACTIVE on all the virtual servers that share the IP address, the appliance responds to the ping requests if at least one of the virtual servers is UP. Otherwise, the appliance does not respond.
If set to ACTIVE on some virtual servers and PASSIVE on the others, the appliance responds if at least one virtual server with the ACTIVE setting is UP. Otherwise, the appliance does not respond.

Note: This parameter is available at the virtual server level. A similar parameter, ICMP Response, is available at the IP address level, for IPv4 addresses of type VIP. To set that parameter, use the add ip command in the CLI or the Create IP dialog box in the GUI.

#####ip_address

Specifies the set of IP addresses expected in the monitoring response from the DNS server if the record type is A or AAAA. Applicable to DNS monitors.

Valid options: An IP address or an array of IP addresses.

#####ip_mask

IP mask, in dotted decimal notation, for the IP Pattern parameter. Can have leading or trailing non-zero octets (for example, 255.255.240.0 or 0.0.255.255). Accordingly, the mask specifies whether the first n bits or the last n bits of the destination IP address in a client request are to be matched with the corresponding bits in the IP pattern. The former is called a forward mask. The latter is called a reverse mask.

#####ip_pattern

IP address pattern, in dotted decimal notation, for identifying packets to be accepted by the virtual server. The IP Mask parameter specifies which part of the destination IP address is matched against the pattern. Mutually exclusive with the IP Address parameter.

For example, if the IP pattern assigned to the virtual server is 198.51.100.0 and the IP mask is 255.255.240.0 (a forward mask), the first 20 bits in the destination IP addresses are matched with the first 20 bits in the pattern. The virtual server accepts requests with IP addresses that range from 198.51.96.1 to 198.51.111.254. You can also use a pattern such as 0.0.2.2 and a mask such as 0.0.255.255 (a reverse mask).

If a destination IP address matches more than one IP pattern, the pattern with the longest match is selected, and the associated virtual server processes the request. For example, if virtual servers vs1 and vs2 have the same IP pattern, 0.0.100.128, but different IP masks of 0.0.255.255 and 0.0.224.255, a destination IP address of 198.51.100.128 has the longest match with the IP pattern of vs1. If a destination IP address matches two or more virtual servers to the same extent, the request is processed by the virtual server

#####layer2_parameters

Identifies a connection.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####listen_policy

Specifies the listen policy for csvserver. The string can be either an existing expression name (configured using add policy expression command) or else it can be an in-line expression with a maximum of 1499 characters.

#####listen_priority

Specifies the priority for listen policy of csvserver.

Maximum value: 100

#####mssql_server_version

The version of the MSSQL server.

Valid options: 70, 2000, 2000SP1, 2005, 2008, 2008R2.

#####mysql_character_set

The character set returned by the MySQL vserver.

#####mysql_protocol_version

The protocol version returned by the MySQL vserver.

#####mysql_server_capabilities

The server capabilities returned by the MySQL vserver.

#####mysql_server_version

The server version string returned by the MySQL vserver.

#####name

#####net_profile_name

The name of the network profile.

#####oracle_server_version

Oracle server version.

Valid options: 10G, 11G.

#####port

Required. Specifies the port number of the service.

Valid options: '*' or integers. Minimum value: 1.

#####precedence

The precedence on the content switching virtual server between rule-based and URL-based policies.

Valid options: RULE, URL. The default precedence is RULE.

RULE: If the precedence is configured as RULE, the incoming request is applied against the content switching policies created with the -rule argument. If none of the rules match, then the URL in the request is applied against the content switching policies created with the -url option.

For example, this precedence can be used if certain client attributes (such as a specific type of browser) need to be served different content and all other clients can be served from the content distributed among the servers.
URL: If the precedence is configured as URL, the incoming request URL is applied against the content switching policies created with the -url option. If none of the policies match, then the request is applied against the content switching policies created with the -rule option.

This precedence can also be used if some content (such as images) is the same for all clients, but other content (such as text) is different for different clients. In this case, the images will be served to all clients, but the text will be served to specific clients based on specific attributes, such as Accept-Language.

#####purge_bindings

When true, Puppet will purge all unmanaged netscaler_csvserver_rewritepolicy_binding and netscaler_csvserver_responderpolicy_binding resources associated with this csvserver. Valid options: 'true', 'false'. Default: 'false'.

#####push

Processes traffic on bound Push vserver.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####push_label_expression

Specifies the expression to extract the label in response from server. The string can be either a named expression (configured using add policy expression command) or else it can be an in-line expression with a maximum of 63 characters.

#####push_multiple_clients

Specifies if multiple web 2.0 connections from the same client can connect to this vserver and expect updates.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####push_virtual_server_name

Name of the type PUSH/SSL_PUSH lbvserver to which the server pushes updates received on the client-facing load balancing virtual server.

#####range

Number of IP addresses that the appliance must generate and assign to the virtual server. The virtual server then functions as a network virtual server, accepting traffic on any of the generated IP addresses. The IP addresses are generated automatically, as follows:

For a range of n, the last octet of the address specified by the IP Address parameter increments n-1 times.
If the last octet exceeds 255, it rolls over to 0 and the third octet increments by 1.

Minimum value: 1 Maximum value: 254

#####redirect_port_rewrite

Rewrite the port and change the protocol to ensure successful HTTP redirects from services.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####redirect_url URL to which to redirect traffic if the virtual server becomes unavailable.

WARNING: Make sure that the domain in the URL does not match the domain specified for a content switching policy. If it does, requests are continuously redirected to the unavailable virtual server.

#####rhi_state

Injects a host route according to the setting on the virtual servers.

Valid options: PASSIVE, ACTIVE.

If set to PASSIVE on all the virtual servers that share the IP address, the appliance always injects the hostroute.
If set to ACTIVE on all the virtual servers that share the IP address, the appliance injects even if one virtual server is UP.
If set to ACTIVE on some virtual servers and PASSIVE on the others, the appliance, injects even if one virtual server set to ACTIVE is UP.

#####rtsp_natting

Enables natting for RTSP data connection.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####service_type

Specifies the service type of the virtual server.

Valid options: HTTP, SSL, TCP, FTP, RTSP, SSL_TCP, UDP, DNS, SIP_UDP, ANY, RADIUS, RDP, MYSQL, MSSQL, DIAMETER, SSL_DIAMETER.

#####spillover_backup_action

Specifies the action to be performed if spillover is to take effect, but no backup chain to spillover is usable or exists.

Valid options: DROP, ACCEPT, REDIRECT.

#####spillover_method

Specifies the type of threshold that, when exceeded, triggers spillover. Available settings function as follows:

'CONNECTION' - Spillover occurs when the number of client connections exceeds the threshold.
'DYNAMICCONNECTION' - Spillover occurs when the number of client connections at the virtual server exceeds the sum of the maximum client (Max Clients) settings for bound services. Do not specify a spillover threshold for this setting, because the threshold is implied by the Max Clients settings of bound services.
'BANDWIDTH' - Spillover occurs when the bandwidth consumed by the virtual server's incoming and outgoing traffic exceeds the threshold.
'HEALTH' - Spillover occurs when the percentage of weights of the services that are UP drops below the threshold. For example, if services svc1, svc2, and svc3 are bound to a virtual server, with weights 1, 2, and 3, and the spillover threshold is 50%, spillover occurs if svc1 and svc3 or svc2 and svc3 transition to DOWN.
'NONE' - Spillover does not occur.

#####spillover_persistence

If spillover occurs, maintain source IP address based persistence for both primary and backup virtual servers.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####spillover_persistence_timeout

Timeout for spillover persistence, in minutes.

Minimum value: 2 Maximum value: 1440

#####spillover_threshold

If the spillover method is set to CONNECTION or DYNAMICCONNECTION, this value is treated as the maximum number of connections a virtual server will handle before spillover takes place. If the spillover method is set to BANDWIDTH, this value is treated as the amount of incoming and outgoing traffic (in Kbps) a vserver will handle before spillover takes place.

Minimum value: 1 Maximum value: 4294967287

#####state

The initial state, enabled or disabled, of the virtual server.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####state_update

To enable the state update for a CSW vserver.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####tcp_profile_name

Name of the TCP profile whose settings are to be applied to the virtual server.

#####traffic_domain

An integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.

Minimum value = 0 Maximum value = 4094

#####vip_header_name

Name of virtual server IP and port header, for use with the VServer IP Port Insertion parameter.

#####virtual_server_ip_port_insertion

The virtual IP and port header insertion option for the vserver. Accepts the following values:

'VIPADDR' - Header contains the vserver's IP address and port number without any translation.
'OFF' - The virtual IP and port header insertion option is disabled.
'V6TOV4MAPPING' - Header contains the mapped IPv4 address that corresponds to the IPv6 address of the vserver and the port number. An IPv6 address can be mapped to a user-specified IPv4 address using the set ns ip6 command.

###Type: netscaler_csvserver_cspolicy_binding

Manages a binding between a content switching vserver and a content switching policy.

####Parameters

All parameters, except where otherwise noted, are optional. Their default values are determined by your particular NetScaler setup.

#####ensure

The basic state that the resource should be in.

Valid values are 'present', 'absent'.

#####goto_expression

Expression specifying the priority of the next policy that gets evaluated if the current policy rule evaluates to true.

#####label_name

Label of policy to invoke if the bound policy evaluates to true.

#####name

The title of the bind resource, composed of the title of the csvserver and the title of the policy: 'csvserver_name/policy_name'.

#####priority

The priority of the policy binding. Values can be any integer between 1 and 2147483647.

#####target_lbvserver

The virtual server name to which content will be switched.

###Type: netscaler_csvserver_responderpolicy_binding

Manages a binding between a content switching vserver and a responder policy.

####Parameters

All parameters, except where otherwise noted, are optional. Their default values are determined by your particular NetScaler setup.

#####ensure

The basic state that the resource should be in.

Valid values are 'present', 'absent'.

#####goto_expression

Expression specifying the priority of the next policy that gets evaluated if the current policy rule evaluates to true.

#####invoke_policy_label

Label of policy to invoke if the bound policy evaluates to true.

#####invoke_vserver_label

Label of vserver to invoke if the bound policy evaluates to true.

#####name

The title of the bind resource, composed of the title of the csvserver and the title of the responder policy: 'csvserver_name/policy_name'.

#####priority

The priority of the policy binding. Values can be any integer between 1 and 2147483647.

###Type: netscaler_csvserver_rewritepolicy_binding

Manages a binding between a content switching vserver and a rewrite policy.

####Parameters

All parameters, except where otherwise noted, are optional. Their default values are determined by your particular NetScaler setup.

#####choose_type

Type of invocation when invoking a vserver. Available settings functions are Request and Response. This property is not applicable for use in conjunction with invoking a Policy Label.

#####ensure

The basic state that the resource should be in.

Valid values are 'present', 'absent'.

#####goto_expression

Expression specifying the priority of the next policy that gets evaluated if the current policy rule evaluates to true.

#####invoke_policy_label

Label of policy to invoke if the bound policy evaluates to true.

#####invoke_vserver_label

Label of csvserver to invoke if the bound policy evaluates to true.

#####name

The title of the bind resource, composed of the title of the csvserver and the title of the rewrite policy: 'csvserver_name/policy_name'.

#####priority

The priority of the policy binding. Values can be any integer between 1 and 2147483647.

###Type: netscaler_feature

Enables or disables licensed features on a NetScaler device. Licensed features must be enabled before they can be used. For example, the Content Switching feature must be enabled before the content switching resources can be used.

####Parameters

All parameters, except where otherwise noted, are optional. Their default values are determined by your particular NetScaler setup.

#####ensure

The basic state that the resource should be in.

Valid values are 'present', 'absent'.

#####name

Name for the feature. Must begin with an ASCII alphabetic or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters.

###Type: netscaler_file

Allows the uploading of a file to the NetScaler. Only accepts names of .cert .key and *.txt.

####Parameters

All parameters, except where otherwise noted, are optional. Their default values are determined by your particular NetScaler setup.

#####content

The file content. This content will be encoded to Base64.

#####encoding

Encoding type of the file content. Only accepts 'BASE64'.

#####ensure

The basic state that the resource should be in.

Valid values are 'present', 'absent'.

#####name

The name for the file. Must begin with an ASCII alphabetic or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters.

###Type: netscaler_group_user_binding

The group and user binding, in the following format:

group/user:gateway eg testers/joe

####Parameters

All parameters, except where otherwise noted, are optional. Their default values are determined by your particular NetScaler setup.

#####ensure

The basic state that the resource should be in.

Valid values are 'present', 'absent'.

#####name

###Type: netscaler_lbmonitor

Manages load balancer monitoring on the NetScaler appliance. If the service is domain-based, you must use the add server command to create the 'server' entry before you create the service. Then specify the server parameter in the add server command.

####Parameters

All parameters, except where otherwise noted, are optional. Their default values are determined by your particular NetScaler setup.

#####account_application_ids

Specifies a list of Acct-Application-Id attribute value pairs (AVPs) for the Capabilities-Exchange-Request (CER) message to use for monitoring Diameter servers. A maximum of eight of AVPs are supported in a monitoring message.

Valid options: An AVP or an array of up to 8 AVPs.

#####account_session_id

Specifies the Account Session ID to be used in Account Request Packet. Applicable to RADIUS_ACCOUNTING monitors.

Valid options: a string.

#####account_type

Sets the Account Type to be used in Account Request Packet. Applicable to RADIUS_ACCOUNTING monitors.

Valid options: an integer; maximum = 15 Default: 1.

#####action

Specifies the action to perform when the response to an inline monitor (HTTP-INLINE) indicates that the service is down. A service monitored by an inline monitor is considered DOWN if the response code is not one of the codes that have been specified for the Response Code parameter.

Valid options: 'NONE', 'LOG', or 'DOWN'. Default: 'SM_DOWN'.

The following options will have the following impact:

'NONE' - Takes no action.
'LOG' - Logs the event in NSLOG or SYSLOG.
'DOWN' - Marks the service as being down and ensures no traffic is directed to the service until the configured down time has expired. Persistent connections to the service are terminated as soon as the service is marked as DOWN. The event is logged in NSLOG or SYSLOG.

#####application_name

Sets the name of the application used to determine the state of the service. Applicable to CITRIX-XML-SERVICE monitors.

Valid options: a string.

#####attribute

Specifies the attribute to evaluate when the LDAP server responds to the query. Success or failure of the monitoring probe depends on whether the attribute exists in the response.

Valid options: a string.

#####authentication_application_ids

Specifies the list of Auth-Application-Id attribute value pairs (AVPs) for the Capabilities-Exchange-Request (CER) message to use for monitoring Diameter servers. A maximum of eight of these AVPs are supported in a monitoring CER message.

Valid options: An AVP or an array of up to 8 AVPs.

#####base_dn

Sets the base distinguished name of the LDAP service, from where the LDAP server can begin the search for the attributes in the monitoring query. Required for LDAP service monitoring.

Valid options: a string.

#####bind_dn

Sets the distinguished name with which an LDAP monitor can perform the Bind operation on the LDAP server. Applicable to LDAP monitors.

Valid options: a string.

#####called_station_id

Sets the Called Station Id to be used in Account Request Packet. Applicable to RADIUS_ACCOUNTING monitors.

Valid options: a string.

#####calling_station_id

Sets the Calling Stations Id to be used in Account Request Packet. Applicable to RADIUS_ACCOUNTING monitors.

Valid options: a string.

#####check_backend_services

Enables monitoring of services running on storefront server. Storefront services are monitored by probing to a Windows service that runs on the Storefront server and exposes details of which storefront services are running.

Valid options: 'yes', 'no', 'true', 'false', 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', or 'OFF'.

#####custom_header

Specifies a custom header string to include in the monitoring probes.

Valid options: a string.

#####database

Specifies the name of the database to connect to during authentication.

Valid options: a string.

#####destination_ip

Sets the IP address of the service to send probes to. If the parameter is set to 0, the IP address of the server to which the monitor is bound is considered the destination IP address.

Valid options: IP address or '0'.

#####destination_port

Specifies the TCP or UDP port to send the probe to. For most monitors, if the parameter is set to 0, the port number of the service to which the monitor is bound is considered the destination port. For a USER monitor, the destination port is the port number that is included in the HTTP request sent to the dispatcher. This parameter does not apply to PING monitors.

Valid options: integers.

#####deviation

Sets the time to add to the learned average response time in dynamic response time monitoring (DRTM). When a deviation is specified, your NetScaler appliance learns the average response time of bound services and adds the deviation to the average. The final value is then continually adjusted to accommodate response time variations over time. Specified in seconds.

Valid options: an integer expressed in seconds; maximum = 20939000 seconds.

#####dispatcher_ip

Sets the IP address of the dispatcher to send the probe to.

Valid options: IP address.

#####dispatcher_port

Sets the port number on which the dispatcher listens for the monitoring probe.

Valid options: integers.

#####domain

Sets the domain in which the XenDesktop Desktop Delivery Controller (DDC) servers or Web Interface servers are present. Required by CITRIX-XD-DDC and CITRIX-WI-EXTENDED monitors for logging on to the DDC servers and Web Interface servers.

Valid options: a string.

#####down_time

Sets the time duration to wait before probing a service that has been marked as DOWN. Expressed in seconds.

Valid option: an integer expressed in seconds; minimum = 1 second and maximum = 20939000 seconds. Default: 30 seconds.

#####ensure

Determines whether the load balancer monitoring service is present or absent.

Valid options: 'present' or 'absent'.

#####expression

Sets the default syntax expression that evaluates the database server's response to a MySQL-ECV or MSSQL-ECV monitoring query. Must produce a Boolean result, as the result determines the state of the server. If the expression returns true, the probe succeeds.

For example, if you want the appliance to evaluate the error message to determine the state of the server, use the rule 'MYSQL.RES.ROW(10) .TEXT_ELEM(2).EQ("MySQL")'.

Valid options: a string.

#####failure_retries

Sets the number of retries that must fail, out of the number specified for the retries parameter, for a service to be marked as DOWN. '0' means that all the retries must fail if the service is to be marked as DOWN.

For example, if the retries parameter is set to 10 and the failure_retries parameter is set to 6, out of the ten probes sent, at least six probes must fail if the service is to be marked as DOWN.

Valid options: an integer; maximum = 32. Default: 0.

#####file_name

Sets the name of a file on the FTP server. Your NetScaler appliance monitors the FTP service by periodically checking the existence of the file on the server. Applicable to FTP-EXTENDED monitors.

Valid options: a string.

#####filter

Filters criteria for the LDAP query.

Valid options: a string.

#####firmware_revision

Sets the Firmware-Revision value for the Capabilities-Exchange-Request (CER) message to use for monitoring Diameter servers.

Valid options: an integer.

#####framed_ip

Sets the source IP the packet will go out with. Applicable to RADIUS_ACCOUNTING monitors.

Valid options: a valid IP address.

#####group_name

Sets the name of a newsgroup available on the monitored NNTP service. Your NetScaler appliance periodically generates an NNTP query for the name of the newsgroup and evaluates the response. If the newsgroup is found on the server, the service is marked as UP. If the newsgroup does not exist or if the search fails, the service is marked as DOWN. Applicable to NNTP monitors.

Valid options: a string.

#####host_ip

Sets the Host-IP-Address value for the Capabilities-Exchange-Request (CER) message to use for monitoring Diameter servers. If Host-IP-Address is not specified, the appliance inserts the mapped IP (MIP) address or subnet IP (SNIP) address from which the CER request (the monitoring probe) is sent.

Valid options: a valid IP address.

#####http_request

Specifies the HTTP request to send to the server (for example, "HEAD /file.html").

Valid options: a string.

#####inband_security_id

Specifies the Inband-Security-Id for the Capabilities-Exchange-Request (CER) message to use for monitoring Diameter servers.

Valid options: 'NO_INBAND_SECURITY' or 'TLS'.

#####interval

Determines the time interval in seconds between two successive probes. Must be greater than the value of response_timeout.

Valid options: an integer expressed in seconds; minimum = 1 second and maximum = 20940000 seconds. Default: 5 seconds.

#####ip_address

Specifies the set of IP addresses expected in the monitoring response from the DNS server if the record type is A or AAAA. Applicable to DNS monitors.

Valid options: An array of IP addresses.

#####ip_tunnel

Determines whether to send the monitoring probe to the load balancing service through an IP tunnel. A destination IP address must be specified.

Valid options: 'yes', 'no', 'true', 'false', 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', or 'OFF'. Default: 'NO'.

#####kcd_account

Specifices the KCD Account used by MSSQL monitor.

Valid options: a string.

#####logon_agent_service_version

Sets the version number of the Citrix Advanced Access Control Logon Agent. Required by the CITRIX-AAC-LAS monitor.

Valid options: a string.

#####logon_point_name

Specifies the name of the logon point that is configured for the Citrix Access Gateway Advanced Access Control software. Required if you want to monitor the associated login page or Logon Agent. Applicable to CITRIX-AAC-LAS and CITRIX-AAC-LOGINPAGE monitors.

Valid options: a string.

#####lrtm

Calculates the least response times for bound services. If this parameter is not enabled, the appliance does not learn the response times of the bound services. Also used for LRTM load balancing.

Valid options: 'yes', 'no', 'true', 'false', 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', or 'OFF'

#####max_forwards

Sets the maximum number of hops that the SIP request used for monitoring can traverse to reach the server. Applicable only to SIP-UDP monitors.

Valid options: an integer; maximum = 255 Default: 1.

#####metric_table

Specifies a metric table to bind metrics to.

Valid options: a string.

#####name

#####nas_id

Specifies the NAS-Identifier to send in the Access-Request packet. Applicable to RADIUS monitors.

Valid options: a string.

#####nas_ip

Sets the Network Access Server (NAS) IP address to use as the source IP address when monitoring a RADIUS server. Applicable to RADIUS and RADIUS_ACCOUNTING monitors.

Valid options: IP Address.

#####net_profile

Sets the name of the network profile.

Valid options: a string.

#####origin_host

Specifies the Origin-Host value for the Capabilities-Exchange-Request (CER) message to use for monitoring Diameter servers.

Valid options: a string.

#####origin_realm

Specifies the Origin-Realm value for the Capabilities-Exchange-Request (CER) message to use for monitoring Diameter servers.

Valid options: a string.

#####password

Sets the password required for logging on to the RADIUS, NNTP, FTP, FTP-EXTENDED, MYSQL, MSSQL, POP3, CITRIX-AG, CITRIX-XD-DDC, CITRIX-WI-EXTENDED, CITRIX-XNC-ECV or CITRIX-XDM servers. Used in conjunction with the user name specified for the user_name parameter.

Valid options: a string.

#####product_name

Specifies the Product-Name value for the Capabilities-Exchange-Request (CER) message to use for monitoring Diameter servers.

Valid options: a string.

#####protocol_version

Specifies the version of MSSQL server to be monitored.

Valid options: '70', '2000', '2000SP1', '2005', '2008', '2008R2', '2012'. Default: '70'.

#####query

Specifies the domain name to resolve as part of monitoring the DNS service (for example, example.com).

Valid options: a string.

#####query_type

Sets the type of DNS record to send monitoring queries to. Set to 'Address' for querying A records, 'AAAA' for querying AAAA records, and 'Zone' for querying the SOA record.

Valid options: 'Address', 'Zone', or 'AAAA'.

#####radius_key

Specifies the authentication key (shared secret text string) for RADIUS clients and servers to exchange. Applicable to RADIUS and RADIUS_ACCOUNTING monitors.

Valid options: a string.

#####receive_string

Specifies the string expected from the server for the service to be marked as UP. Applicable to TCP-ECV, HTTP-ECV, and UDP-ECV monitors.

Valid options: a string.

#####resp_timeout_threshold

Sets the response time threshold, specified as a percentage of the response_timeout parameter. If the response to a monitor probe has not arrived when the threshold is reached, the NetScaler appliance generates an SNMP trap called monRespTimeoutAboveThresh. After the response time returns to a value below the threshold, the appliance generates a monRespTimeoutBelowThresh SNMP trap. For the traps to be generated, the "MONITOR-RTO-THRESHOLD" alarm must also be enabled.

Valid options: an integer; maximum = 100. Default: 1.

#####response_codes

Sets the response codes that mark the service as UP. For any other response code, the action performed depends on the monitor type. HTTP monitors and RADIUS monitors mark the service as DOWN, while HTTP-INLINE monitors perform the action indicated by the action parameter.

Valid options: a string or an array of strings.

#####response_timeout

Sets the amount of time the appliance must wait before it marks a probe as FAILED. Must be less than the value specified for the interval parameter.

Valid options: an integer; minimum = 1s and maximum = 20939000s. Default: 2s.

Note: This parameter does not apply to UDP-ECV monitors that do not have a receive string configured. For UDP-ECV monitors with no receive string, probe failure is indicated by an ICMP port unreachable error received from the service.

#####retries

Sets the maximum number of probes to send to establish the state of a service for which a monitoring probe failed.

Valid options: an integer; minimum = 1 and maximum = 127. Default: 3.

#####reverse

Specifies whether to ,ark a service as DOWN instead of UP when probe criteria are satisfied, and as UP instead of DOWN when probe criteria are not satisfied.

Valid options: 'yes', 'no', 'true', 'false', 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', or 'OFF'. Default: 'NO'.

#####rtsp_request

Specifies the RTSP request to send to the server (for example, "OPTIONS *").

Valid options: a string.

#####script_arguments

Specifies the string of arguments for the script. The string is copied verbatim into the request.

Valid options: a string.

#####script_name

Sets the path and name of the script to execute. The script must be available on the NetScaler appliance, in the /nsconfig/monitors/ directory.

Valid options: a string.

#####secondary_password

Sets the secondary password that users might have to provide to log on to the Access Gateway server. Applicable to CITRIX-AG monitors.

Valid options: a string.

#####secure

Determines whether to use a secure SSL connection when monitoring a service. Applicable only to TCP-based monitors. The secure option cannot be used with a CITRIX-AG monitor, because a CITRIX-AG monitor uses a secure connection by default.

Valid options: 'yes', 'no', 'true', 'false', 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', or 'OFF'.Default: 'NO'.

#####send_string

Specifies the string to send to the service. Applicable to TCP-ECV, HTTP-ECV, and UDP-ECV monitors.

Valid options: a string.

#####sid

Sets the name of the service identifier used to connect to the Oracle database during authentication.

Valid options: a string.

#####sip_method

Specifies the SIP method to use for the query. Applicable only to SIP-UDP monitors.

Valid options: 'OPTIONS', 'INVITE', or 'REGISTER'.

#####sip_reg_uri

Specifies the SIP user to be registered. Applicable only to SIP-UDP monitors with the sip_method parameter set to 'REGISTER'.

Valid options: a string.

#####sip_uri

Specifies the SIP URI string to send to the service (for example, sip:sip.test). Applicable only to SIP-UDP monitors.

Valid options: a string.

#####site_path

Sets the URL of the logon page. For CITRIX-WEB-INTERFACE monitors: to monitor a dynamic page under the site path, terminate the site path with a slash (/). Applicable to CITRIX-WEB-INTERFACE, CITRIX-WI-EXTENDED and CITRIX-XDM monitors.

Valid options: a string.

#####snmp_alert_retries

Sets the number of consecutive probe failures after which the appliance generates an SNMP trap called monProbeFailed.

Valid options: an integer; maximum = 32.

#####snmp_community

Sets the community name for SNMP monitors.

Valid options: a string.

#####snmp_oid

Sets the SNMP OID for SNMP monitors.

Valid options: a string.

#####snmp_threshold

Specifies the threshold for SNMP monitors.

Valid options: a string.

#####snmp_version

Sets the SNMP version to be used for SNMP monitors.

Valid options: 'V1' or 'V2'.

#####sql_query

Specifies a SQL query for a MySQL-ECV or MSSQL-ECV monitor. Sent to the database server after the server authenticates the connection.

Valid options: a string.

#####state

Sets the state of the monitor. The 'DISABLED' setting disables not only the monitor being configured, but all monitors of the same type until the parameter is set to ENABLED. If the monitor is bound to a service, the state of the monitor is not taken into account when the state of the service is determined.

Valid options: 'yes', 'no', 'true', 'false', 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', or 'OFF'.

#####store_db

Determines whether to store the database list populated with the responses to monitor probes. Used in database specific load balancing if MSSQL-ECV/MySQL-ECV monitor is configured.

Valid options: 'yes', 'no', 'true', 'false', 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', or 'OFF'.

#####store_name

Sets the store name. Applicable to STOREFRONT monitors.

Valid options: a string.

#####storefront_account_service

Determines whether to enable or disable probing for Account Service. Applicable only to Store Front monitors. Multi-tenancy configuration users may skip this parameter.

Valid options: 'yes', 'no', 'true', 'false', 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', or 'OFF'. Default: 'YES'.

#####success_retries

Specifies the number of consecutive successful probes required to transition a service's state from DOWN to UP.

Valid option: an integer; minimum = 1 and maximum = 32. Default: 1.

#####supported_vendor_ids

Lists the Supported-Vendor-Id attribute value pairs (AVPs) for the Capabilities-Exchange-Request (CER) message to use for monitoring Diameter servers. A maximum eight of these AVPs are supported in a monitoring message.

Valid options: An AVP or an array of up to 8 AVPs.

#####tos

Determines whether to probe the service by encoding the destination IP address in the IP TOS (6) bits.

Valid options:'yes', 'no', 'true', 'false', 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', or 'OFF'.

#####tos_id

Sets the TOS ID of the specified destination IP. Applicable only when the tos parameter is set.

Valid options: an integer; minimum = 1 and maximum = 63.

#####transparent

Determines whether the monitor is bound to a transparent device, such as a firewall or router. The state of a transparent device depends on the responsiveness of the services behind it. If a transparent device is being monitored, a destination IP address must be specified. The probe is sent to the specified IP address by using the MAC address of the transparent device.

Valid options: 'yes', 'no', 'true', 'false', 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', or 'OFF'. Default: 'NO'.

#####type

Specifies type of monitor that you want to create.

Valid options: 'PING', 'TCP', 'HTTP', 'TCP-ECV', 'HTTP-ECV', 'UDP-ECV', 'DNS', 'FTP', 'LDNS-PING', 'LDNS-TCP', 'LDNS-DNS', 'RADIUS', 'USER', 'HTTP-INLINE', 'SIP-UDP', 'LOAD', 'FTP-EXTENDED', 'SMTP', 'SNMP', 'NNTP', 'MYSQL', 'MYSQL-ECV', 'MSSQL-ECV', 'ORACLE-ECV', 'LDAP', 'POP3', 'CITRIX-XML-SERVICE', 'CITRIX-WEB-INTERFACE', 'DNS-TCP', 'RTSP', 'ARP', 'CITRIX-AG', 'CITRIX-AAC-LOGINPAGE', 'CITRIX-AAC-LAS', 'CITRIX-XD-DDC', 'ND6', 'CITRIX-WI-EXTENDED', 'DIAMETER', 'RADIUS_ACCOUNTING', 'STOREFRONT', 'APPC', 'CITRIX-XNC-ECV', or 'CITRIX-XDM'.

#####user_name

Specifies the user name with which to probe the RADIUS, NNTP, FTP, FTP-EXTENDED, MYSQL, MSSQL, POP3, CITRIX-AG, CITRIX-XD-DDC, CITRIX-WI-EXTENDED, CITRIX-XNC or CITRIX-XDM server.

Valid options: a string.

#####validate_credentials

Determines whether to validate the credentials of the Xen Desktop DDC server user. Applicable to CITRIX-XD-DDC monitors.

Valid options: 'yes', 'no', 'true', 'false', 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', or 'OFF'. Default: 'NO'.

#####vendor_id

Sets the vendor-ID value for the Capabilities-Exchange-Request (CER) message to use for monitoring Diameter servers.

Valid options: integers.

#####vendor_specific_vendor_id

Sets the vendor-ID to use in the Vendor-Specific-Application-Id grouped attribute-value pair (AVP) in the monitoring CER message. To specify Auth-Application-Id or Acct-Application-Id in Vendor-Specific-Application-Id, use vendorSpecificAuthApplicationIds or vendorSpecificAcctApplicationIds, respectively. Only one Vendor-Id is supported for all the Vendor-Specific-Application-Id AVPs in a CER monitoring message.

Valid options: integers; minimum = 1

###Type: netscaler_lbvserver

Manages load-balanced VServer on the NetScaler appliance.

####Parameters

All parameters, except where otherwise noted, are optional. Their default values are determined by your particular NetScaler setup.

#####appflow_logging

Apply AppFlow logging to the virtual server.

Valid options: 'yes', 'no', 'true', 'false', 'enabled', 'disabled', 'ENABLED', DISABLED', YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####authentication

Enable or disable user authentication. Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####authentication_401

Enable or disable user authentication with HTTP 401 responses.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####authentication_fqdn

Fully qualified domain name (FQDN) of the authentication virtual server to which the user must be redirected for authentication. Make sure that the Authentication parameter is set to ENABLED.

#####authentication_profile_name

Name of the authentication profile to be used when authentication is turned on.

#####authentication_virtual_server_name

Name of an authentication virtual server with which to authenticate users.

#####backup_persistence_timeout

Time period for which backup persistence is in effect.

Minimum value: 2 Maximum value: 1440

#####backup_virtual_server

Name of the backup virtual server to which to forward requests if the primary virtual server goes DOWN or reaches its spillover threshold.

#####bypass_aaaa

If this option is enabled while resolving DNS64 query AAAA queries are not sent to back end dns server.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####cacheable

Route cacheable requests to a cache redirection virtual server. The load balancing virtual server can forward requests only to a transparent cache redirection virtual server that has an IP address and port combination of *:80, so such a cache redirection virtual server must be configured on the appliance.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####client_timeout

Idle time, in seconds, after which a client connection is terminated.

Valid values: an integer. Maximum value: 31536000.

#####comment

Any comments that you might want to associate with the virtual server.

#####connection_failover

Mode in which the connection failover feature must operate for the virtual server. After a failover, established TCP connections and UDP packet flows are kept active and resumed on the secondary appliance. Clients remain connected to the same servers. Available settings function as follows:

STATEFUL - The primary appliance shares state information with the secondary appliance, in real time, resulting in some runtime processing overhead.
STATELESS - State information is not shared, and the new primary appliance tries to re-create the packet flow on the basis of the information contained in the packets it receives.
DISABLED - Connection failover does not occur.

#####cookie_name

Use this parameter to specify the cookie name for COOKIE peristence type. It specifies the name of cookie with a maximum of 32 characters. If not specified, cookie name is internally generated.

#####data_length

Length of the token to be extracted from the data segment of an incoming packet, for use in the token method of load balancing. The length of the token, specified in bytes, must not be greater than 24 KB. Applicable to virtual servers of type TCP.

Minimum value: 1 Maximum value: 100

#####data_offset

Offset to be considered when extracting a token from the TCP payload. Applicable to virtual servers, of type TCP, using the token method of load balancing. Must be within the first 24 KB of the TCP payload.

Maximum value: 25400

#####database_specific_lb

Enable database specific load balancing for MySQL and MSSQL service types.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####db_profile_name

Name of the DB profile whose settings are to be applied to the virtual server.

#####disable_primary_on_down

If the primary virtual server goes down, do not allow it to return to primary status until manually enabled.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####dns64

This argument is for enabling/disabling the dns64 on lbvserver.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####down_state_flush

Flush all active transactions associated with a virtual server whose state transitions from UP to DOWN. Do not enable this option for applications that must complete their transactions.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####ensure

The basic state that the resource should be in. Valid values are 'present', 'absent'.

#####health_threshold

Threshold in percent of active services below which vserver state is made down. If this threshold is 0, vserver state will be up even if one bound service is up.

Minimum value: 0 Maximum value: 100

#####http_profile_name

Name of the HTTP profile whose settings are to be applied to the virtual server.

#####icmp_virtual_server_response

How the NetScaler appliance responds to ping requests received for an IP address that is common to one or more virtual servers. Available settings function as follows:

If set to PASSIVE on all the virtual servers that share the IP address, the appliance always responds to the ping requests.
If set to ACTIVE on all the virtual servers that share the IP address, the appliance responds to the ping requests if at least one of the virtual servers is UP. Otherwise, the appliance does not respond.
If set to ACTIVE on some virtual servers and PASSIVE on the others, the appliance responds if at least one virtual server with the ACTIVE setting is UP. Otherwise, the appliance does not respond.

#####ip_address

The IPv4 or IPv6 address to assign to the virtual server.

#####ip_mask

#####ip_pattern

#####layer2_parameters

Use Layer 2 parameters (channel number, MAC address, and VLAN ID) in addition to the 4-tuple <source IP>:<source port>::<destination IP>:<destination port> that is used to identify a connection. Allows multiple TCP and non-TCP connections with the same 4-tuple to co-exist on the NetScaler appliance.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####lb_method

Load balancing method. The available settings function as follows:

'ROUNDROBIN' - Distribute requests in rotation, regardless of the load. Weights can be assigned to services to enforce weighted round robin distribution.
'LEASTCONNECTION' (default) - Select the service with the fewest connections.
'LEASTRESPONSETIME' - Select the service with the lowest average response time.
'LEASTBANDWIDTH' - Select the service currently handling the least traffic.
'LEASTPACKETS' - Select the service currently serving the lowest number of packets per second.
'CUSTOMLOAD' - Base service selection on the SNMP metrics obtained by custom load monitors.
'LRTM' - Select the service with the lowest response time. Response times are learned through monitoring probes. This method also takes the number of active connections into account.

Also available are a number of hashing methods, in which the appliance extracts a predetermined portion of the request, creates a hash of the portion, and then checks whether any previous requests had the same hash value. If it finds a match, it forwards the request to the service that served those previous requests. The available hashing methods are as follows:

'URLHASH' - Create a hash of the request URL (or part of the URL).
'DOMAINHASH' - Create a hash of the domain name in the request (or part of the domain name). The domain name is taken from either the URL or the Host header. If the domain name appears in both locations, the URL is preferred. If the request does not contain a domain name, the load balancing method defaults to LEASTCONNECTION.
'DESTINATIONIPHASH' - Create a hash of the destination IP address in the IP header.
'SOURCEIPHASH' - Create a hash of the source IP address in the IP header.
'TOKEN' - Extract a token from the request, create a hash of the token, and then select the service to which any previous requests with the same token hash value were sent.
'SRCIPDESTIPHASH' - Create a hash of the string obtained by concatenating the source IP address and destination IP address in the IP header.
'SRCIPSRCPORTHASH' - Create a hash of the source IP address and source port in the IP header.
'CALLIDHASH' - Create a hash of the SIP Call-ID header.

#####lb_method_hash_length

Number of bytes to consider for the hash value used in the URLHASH and DOMAINHASH load balancing methods.

Minimum value = 1 Maximum value = 4096

#####lb_method_ipv6_mask_length

Number of bits to consider in an IPv6 destination or source IP address, for creating the hash that is required by the DESTINATIONIPHASH and SOURCEIPHASH load balancing methods.

Minimum value = 1 Maximum value = 128

#####lb_method_netmask

IPv4 subnet mask to apply to the destination IP address or source IP address when the load balancing method is DESTINATIONIPHASH or SOURCEIPHASH.

#####listen_policy

Default syntax expression identifying traffic accepted by the virtual server. Can be either an expression (for example, CLIENT.IP.DST.IN_SUBNET(192.0.2.0/24) or the name of a named expression. In the above example, the virtual server accepts all requests whose destination IP address is in the 192.0.2.0/24 subnet.

#####listen_priority

Integer specifying the priority of the listen policy. A higher number specifies a lower priority. If a request matches the listen policies of more than one virtual server the virtual server whose listen policy has the highest priority (the lowest priority number) accepts the request.

Maximum value: 101

#####macmode_retain_vlan

This option is used to retain vlan information of incoming packet when macmode is enabled.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####max_autoscale_members

Maximum number of members expected to be present when vserver is used in Autoscale.

Maximum value: 5000

#####min_autoscale_members

Minimum number of members expected to be present when vserver is used in Autoscale.

Maximum value: 5000

#####mssql_server_version

For a load balancing virtual server of type MSSQL, the Microsoft SQL Server version. Set this parameter if you expect some clients to run a version different from the version of the database. This setting provides compatibility between the client-side and server-side connections by ensuring that all communication conforms to the server's version.

Valid options: 70, 2000, 2000SP1, 2005, 2008, 2008R2, 2012.

#####mysql_character_set

Character set that the virtual server advertises to clients.

#####mysql_protocol_version

MySQL protocol version that the virtual server advertises to clients.

#####mysql_server_capabilities

Server capabilities that the virtual server advertises to clients.

#####mysql_server_version

MySQL server version string that the virtual server advertises to clients.

#####name

#####net_profile_name

Name of the network profile to associate with the virtual server. If you set this parameter, the virtual server uses only the IP addresses in the network profile as source IP addresses when initiating connections with servers.

#####new_service_request_increment_interval

Interval, in seconds, between successive increments in the load on a new service or a service whose state has just changed from DOWN to UP. A value of 0 (zero) specifies manual slow start.

Maximum value: 3600

#####new_service_request_rate

Number of requests, or percentage of the load on existing services, by which to increase the load on a new service at each interval in slow-start mode. A non-zero value indicates that slow-start is applicable. A zero value indicates that the global RR startup parameter is applied. Changing the value to zero will cause services currently in slow start to take the full traffic as determined by the LB method. Subsequently, any new services added will use the global RR factor.

#####new_service_request_unit

Units in which to increment load at each interval in slow-start mode. Possible values = PER_SECOND, PERCENT.

#####oracle_server_version

Oracle server version.

Valid options: 10G, 11G.

#####persist_avp_no

Persist AVP number for Diameter Persistency. If this AVP is not defined in Base RFC 3588 and it is nested inside a Grouped AVP, define a sequence of AVP numbers (max 3) in order of parent to child. So if persist AVP number X is nested inside AVP Y, which is nested in Z, then you would define the list as Z Y X.

Minimum value: 1

#####persistence_backup

Backup persistence type for the virtual server. Becomes operational if the primary persistence mechanism fails. Valid options: SOURCEIP, NONE.

#####persistence_ipv4_mask

Persistence mask for IP based persistence types, for IPv4 virtual servers.

#####persistence_ipv6_mask_length

Persistence mask for IP based persistence types, for IPv6 virtual servers.

Minimum value: 1 Maximum value: 128

#####persistence_timeout

Time period for which a persistence session is in effect.

Maximum value: 1440

#####persistence_type

Type of persistence for the virtual server. Available settings function as follows:

'SOURCEIP' - Connections from the same client IP address belong to the same persistence session.
'COOKIEINSERT' - Connections that have the same HTTP Cookie, inserted by a Set-Cookie directive from a server, belong to the same persistence session.
'SSLSESSION' - Connections that have the same SSL Session ID belong to the same persistence session.
'CUSTOMSERVERID' - Connections with the same server ID form part of the same session. For this persistence type, set the Server ID (CustomServerID) parameter for each service and configure the Rule parameter to identify the server ID in a request.
'RULE' - All connections that match a user defined rule belong to the same persistence session.
'URLPASSIVE' - Requests that have the same server ID in the URL query belong to the same persistence session. The server ID is the hexadecimal representation of the IP address and port of the service to which the request must be forwarded. This persistence type requires a rule to identify the server ID in the request.
'DESTIP' - Connections to the same destination IP address belong to the same persistence session.
'SRCIPDESTIP' - Connections that have the same source IP address and destination IP address belong to the same persistence session.
'CALLID' - Connections that have the same CALL-ID SIP header belong to the same persistence session.
'RTSPSID' - Connections that have the same RTSP Session ID belong to the same persistence session.

#####port

Required. Specifies the port number of the service. Valid options: '*' or integers.

#####priority_queuing

Use priority queuing on the virtual server, based persistence types, for IPv6 virtual servers.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####process_local

By turning on this option packets destined to a vserver in a cluster will not under go any steering. Turn this option for single packet request response mode or when the upstream device is performing a proper RSS for connection based distribution.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####push

Process traffic with the push virtual server that is bound to this load balancing virtual server.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####push_label_expression

Expression for extracting a label from the server's response. Can be either an expression or the name of a named expression.

#####push_multiple_clients

Allow multiple Web 2.0 connections from the same client to connect to the virtual server and expect updates.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####push_virtual_server_name

Name of the load balancing virtual server, of type PUSH or SSL_PUSH, to which the server pushes updates received on the load balancing virtual server that you are configuring.

#####range

For a range of n, the last octet of the address specified by the IP Address parameter increments n-1 times.
If the last octet exceeds 255, it rolls over to 0 and the third octet increments by 1.

Minimum value: 1 Maximum value: 254

#####recursion_available

When set to 'YES', this option causes the DNS replies from this vserver to have the RA bit turned on. Typically one would set this option to YES, when the vserver is load balancing a set of DNS servers that support recursive queries.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####redirect_port_rewrite

Rewrite the port and change the protocol to ensure successful HTTP redirects from services.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####redirect_url

URL to which to redirect traffic if the virtual server becomes unavailable.

#####redirection_mode

Redirection mode for load balancing. Available settings function as follows:

IP - Before forwarding a request to a server, change the destination IP address to the server's IP address.
MAC - Before forwarding a request to a server, change the destination MAC address to the server's MAC address. The destination IP address is not changed. MAC-based redirection mode is used mostly in firewall load balancing deployments.
IPTUNNEL - Perform IP-in-IP encapsulation for client IP packets. In the outer IP headers, set the destination IP address to the IP address of the server and the source IP address to the subnet IP (SNIP). The client IP packets are not modified. Applicable to both IPv4 and IPv6 packets.
TOS - Encode the virtual server's TOS ID in the TOS field of the IP header.

You can use either the IPTUNNEL or the TOS option to implement Direct Server Return (DSR).

#####response_rule

Default syntax expression specifying which part of a server's response to use for creating rule based persistence sessions (persistence type RULE). Can be either an expression or the name of a named expression.

Example:

HTTP.RES.HEADER("setcookie").VALUE(0).TYPECAST_NVLIST_T('=',';').VALUE("server1").

#####rhi_state

Route Health Injection (RHI) functionality of the NetSaler appliance for advertising the route of the VIP address associated with the virtual server. When Vserver RHI Level (RHI) parameter is set to VSVR_CNTRLD, the following are different RHI behaviors for the VIP address on the basis of RHIstate (RHI STATE) settings on the virtual servers associated with the VIP address:

If you set RHI STATE to PASSIVE on all virtual servers, the NetScaler ADC always advertises the route for the VIP address.
If you set RHI STATE to ACTIVE on all virtual servers, the NetScaler ADC advertises the route for the VIP address if at least one of the associated virtual servers is in UP state.
If you set RHI STATE to ACTIVE on some and PASSIVE on others, the NetScaler ADC advertises the route for the VIP address if at least one of the associated virtual servers, whose RHI STATE set to ACTIVE, is in UP state.

#####rtsp_natting

Use network address translation (NAT) for RTSP data connections.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####rule

Expression, or name of a named expression, against which traffic is evaluated. Written in the classic or default syntax.

Note: Maximum length of a string literal in the expression is 255 characters. A longer string can be split into smaller strings of up to 255 characters each, and the smaller strings concatenated with the + operator. For example, you can create a 500-character string as follows: '"string of 255 characters" + "string of 245 characters"'.

The following requirements apply only to the NetScaler CLI:

If the expression includes one or more spaces, enclose the entire expression in double quotation marks.
If the expression itself includes double quotation marks, escape the quotations by using the character.
Alternatively, you can use single quotation marks to enclose the rule, in which case you do not have to escape the double quotation marks.

#####service_type

Protocol used by the service (also called the service type).

Valid options: HTTP, FTP, TCP, UDP, SSL, SSL_BRIDGE, SSL_TCP, DTLS, NNTP, DNS, DHCPRA, ANY, SIP_UDP, DNS_TCP, RTSP, PUSH, SSL_PUSH, RADIUS, RDP, MYSQL, MSSQL, DIAMETER, SSL_DIAMETER, TFTP, ORACLE.

#####sessionless

Perform load balancing on a per-packet basis, without establishing sessions. Recommended for load balancing of intrusion detection system (IDS) servers and scenarios involving direct server return (DSR), where session information is unnecessary.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####skip_persistency

Decides the behavior in case the service selected from an existing persistence session has reached threshold.

Valid options: Bypass, ReLb, None.

#####spillover_backup_action

Specifies the action to be performed if spillover is to take effect, but no backup chain to spillover is usable or exists.

Valid options: DROP, ACCEPT, REDIRECT.

#####spillover_method

Specifies the type of threshold that, when exceeded, triggers spillover. Available settings function as follows:

CONNECTION - Spillover occurs when the number of client connections exceeds the threshold.
DYNAMICCONNECTION - Spillover occurs when the number of client connections at the virtual server exceeds the sum of the maximum client (Max Clients) settings for bound services. Do not specify a spillover threshold for this setting, because the threshold is implied by the Max Clients settings of bound services.
BANDWIDTH - Spillover occurs when the bandwidth consumed by the virtual server's incoming and outgoing traffic exceeds the threshold.
HEALTH - Spillover occurs when the percentage of weights of the services that are UP drops below the threshold. For example, if services svc1, svc2, and svc3 are bound to a virtual server, with weights 1, 2, and 3, and the spillover threshold is 50%, spillover occurs if svc1 and svc3 or svc2 and svc3 transition to DOWN.
NONE - Spillover does not occur.

#####spillover_persistence

If spillover occurs, maintain source IP address based persistence for both primary and backup virtual servers.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####spillover_persistence_timeout

Timeout for spillover persistence, in minutes.

Minimum value: 2 Maximum value: 1440

#####spillover_threshold

Threshold at which spillover occurs. Specify an integer for the CONNECTION spillover method, a bandwidth value in kilobits per second for the BANDWIDTH method (do not enter the units), or a percentage for the HEALTH method (do not enter the percentage symbol).

Minimum value: 1 Maximum value: 4294967287

#####state

State of the load balancing virtual server.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####sure_connect

Use SureConnect on the virtual server.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####tcp_profile_name

Name of the TCP profile whose settings are to be applied to the virtual server.

#####tos_id

TOS ID of the virtual server. Applicable only when the load balancing redirection mode is set to TOS.

Minimum value: 1 Maximum value: 63

#####traffic_domain

Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.

Minimum value: 0 Maximum value: 4094

#####vip_header_name

Name for the inserted header. The default name is vip-header.

#####virtual_server_ip_port_insertion

Insert an HTTP header, whose value is the IP address and port number of the virtual server, before forwarding a request to the server. The format of the header is <vipHeader>: <virtual server IP address>_<port number>, where vipHeader is the name that you specify for the header. If the virtual server has an IPv6 address, the address in the header is enclosed in brackets ([ and ]) to separate it from the port number. If you have mapped an IPv4 address to a virtual server's IPv6 address, the value of this parameter determines which IP address is inserted in the header, as follows:

VIPADDR - Insert the IP address of the virtual server in the HTTP header regardless of whether the virtual server has an IPv4 address or an IPv6 address. A mapped IPv4 address, if configured, is ignored.
V6TOV4MAPPING - Insert the IPv4 address that is mapped to the virtual server's IPv6 address. If a mapped IPv4 address is not configured, insert the IPv6 address.
OFF - Disable header insertion.

###Type: netscaler_lbvserver_responderpolicy_binding

Manages a binding between a load balancing vserver and a responder policy.

####Parameters

All parameters, except where otherwise noted, are optional. Their default values are determined by your particular NetScaler setup.

#####ensure

The basic state that the resource should be in. Valid values are 'present', 'absent'.

#####goto_expression

Expression specifying the priority of the next policy that gets evaluated if the current policy rule evaluates to true.

#####invoke_policy_label

Label of policy to invoke if the bound policy evaluates to true.

#####invoke_vserver_label

Label of vserver to invoke if the bound policy evaluates to true.

#####name

The title of the bind resource, composed of the title of the lbvserver and the title of the policy: 'lbvserver_name/policy_name'.

#####priority

The priority of the policy binding. Values can be any integer between 1 and 2147483647.

netscaler_lbvserver_responderpolicy_binding

Manage a binding between a load balancing vserver and a responder policy.

####Parameters

All parameters, except where otherwise noted, are optional. Their default values are determined by your particular NetScaler setup.

#####ensure

The basic state that the resource should be in.

Valid values are 'present', 'absent'.

#####goto_expression

Specifies the priority of the next policy to be evaluated if the current policy rule evaluates to true.

#####invoke_policy_label

Label of the policy to invoke if the bound policy evaluates to true.

#####invoke_vserver_label

Label of the vserver to invoke if the bound policy evaluates to true.

#####name

The title of the bind resource, composed of the title of the lbvserver and the title of the policy: 'lbvserver_name/policy_name'.

#####priority

The priority of the policy binding. Values can be any integer between 1 and 2147483647.

netscaler_lbvserver_rewritepolicy_binding

Manage a binding between a loadbalancing vserver and a rewrite policy.

Parameters

All parameters, except where otherwise noted, are optional. Their default values are determined by your particular NetScaler setup.

`ensure`

The basic state that the resource should be in.

Valid values are 'present', 'absent'.

`goto_expression`

Specifies the priority of the next policy to be evaluated if the current policy rule evaluates to true.

`invoke_policy_label`

Label of the policy to invoke if the bound policy evaluates to true.

`invoke_vserver_label`

Label of the vserver to invoke if the bound policy evaluates to true.

`bind_point`

Bind point to which the policy should be bound.

#####name

The title of the bind resource, composed of the title of the lbvserver and the title of the policy: 'lbvserver_name/policy_name'.

#####priority

The priority of the policy binding. Values can be any integer between 1 and 65536.

###Type: netscaler_lbserver_service_binding

Manages a binding between a load balancing vserver and a service.

####Parameters

All parameters, except where otherwise noted, are optional. Their default values are determined by your particular NetScaler setup.

#####ensure

The basic state that the resource should be in.

Valid values are 'present', 'absent'.

#####name

The title of the bind resource, composed of the title of the lbvserver and the title of the service: 'lbvserver_name/service_name'.

#####weight

Weight to assign to the specified service. Value can be any integer between 1 and 100.

###Type: netscaler_nshostname

Manages NetScaler NTP server objects.

####Parameters

All parameters, except where otherwise noted, are optional. Their default values are determined by your particular NetScaler setup.

#####ensure

The basic state that the resource should be in.

Valid values are 'present', 'absent'.

#####name

Host name for the NetScaler appliance.

#####ownernode

ID of the cluster node for which you are setting the hostname. This can be configured only through the cluster IP address.

Minimum value = 0 Maximum value = 31

###Type: netscaler_nsip

Manages basic NetScaler network IP objects.

####Parameters

All parameters, except where otherwise noted, are optional. Their default values are determined by your particular NetScaler setup.

#####allow_ftp

Allows File Transfer Protocol (FTP) access to this IP address.

Valid options: Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'. Default value: 'ENABLED'.

#####allow_gui

Allows graphical user interface (GUI) access to this IP address.

Valid options: 'ENABLED', 'SECUREONLY', 'DISABLED'. Default value: 'ENABLED'.

#####allow_management_access

Allows access to management applications on this IP address.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'. Default value: 'DISABLED'.

#####allow_snmp

Allows Simple Network Management Protocol (SNMP) access to this IP address.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'. Default value: 'ENABLED'.

#####allow_ssh

Allows secure shell (SSH) access to this IP address.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'. Default value: 'ENABLED'.

#####allow_telnet

Allows Telnet access to this IP address.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'. Default value: 'ENABLED'.

#####arp

Responds to ARP requests for this IP address.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'. Default value: 'ENABLED'.

#####arp_response

Responds to ARP requests for a Virtual IP (VIP) address on the basis of the states of the virtual servers associated with that VIP. Available settings function as follows:

'NONE' - The NetScaler appliance responds to any ARP request for the VIP address, irrespective of the states of the virtual servers associated with the address.
'ONE_VSERVER' - The NetScaler appliance responds to any ARP request for the VIP address if at least one of the associated virtual servers is in UP state.
'ALL_VSERVER' - The NetScaler appliance responds to any ARP request for the VIP address if all of the associated virtual servers are in UP state.

#####`dynamic_routing

Allows dynamic routing on this IP address. Specific to Subnet IP (SNIP) address.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'. Default value: 'DISABLED'.

#####ensure

The basic state that the resource should be in.

Valid values are 'present', 'absent'.

#####host_route

Advertises a route for the VIP address using the dynamic routing protocols running on the NetScaler appliance. Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'.

#####host_route_gateway_ip

IP address of the gateway of the route for this VIP address.

#####host_route_metric

Integer value to add to or subtract from the cost of the route advertised for the VIP address.

Minimum value = -16777215

#####icmp

Responds to ICMP requests for this IP address.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'. Default value: 'ENABLED'.

#####icmp_response

Responds to ICMP requests for a Virtual IP (VIP) address on the basis of the states of the virtual servers associated with that VIP. Available settings function as follows:

'NONE' - The NetScaler appliance responds to any ICMP request for the VIP address, irrespective of the states of the virtual servers associated with the address.
'ONE_VSERVER' - The NetScaler appliance responds to any ICMP request for the VIP address if at least one of the associated virtual servers is in UP state.
'ALL_VSERVER' - The NetScaler appliance responds to any ICMP request for the VIP address if all of the associated virtual servers are in UP state.
'VSVR_CNTRLD' - The behavior depends on the icmp_virtual_server_response property setting on all the associated virtual servers.

The following values can be set for the icmp_virtual_server_response property on a virtual server:

If you set the icmp_virtual_server_response property to active on all virtual servers, NetScaler always responds.
If you set the icmp_virtual_server_response property to active on all virtual servers, NetScaler responds if even one virtual server is UP.
When you set the icmp_virtual_server_response property to active on some and passive on others, NetScaler responds if even one virtual server set to active is UP.

Possible values = 'NONE', 'ONE_VSERVER', 'ALL_VSERVERS', 'VSVR_CNTRLD'.

#####ip_address

IPv4 address to create on the NetScaler appliance. Cannot be changed after the resource is created. If omitted, this parameter's value defaults to the resource's title.

#####ip_type

Type of the IP address to create on the NetScaler appliance. Cannot be changed after the IP address is created. The following are the different types of NetScaler owned IP addresses:

A Subnet IP (SNIP) address is used by the NetScaler ADC to communicate with the servers. The NetScaler also uses the subnet IP address when generating its own packets, such as packets related to dynamic routing protocols, or to send monitor probes to check the health of the servers.
A Virtual IP (VIP) address is the IP address associated with a virtual server. It is the IP address to which clients connect. An appliance managing a wide range of traffic may have many VIPs configured. Some of the attributes of the VIP address are customized to meet the requirements of the virtual server.
A GSLB site IP (GSLBIP) address is associated with a GSLB site. It is not mandatory to specify a GSLBIP address when you initially configure the NetScaler appliance. A GSLBIP address is used only when you create a GSLB site.
A Cluster IP (CLIP) address is the management address of the cluster. All cluster configurations must be performed by accessing the cluster through this IP address.

Default value: SNIP Possible values = SNIP, VIP, NSIP, GSLBsiteIP, CLIP

#####`netmask

Required. Subnet mask associated with the IP address.

#####ospf_area

ID of the area in which the type1 link-state advertisements (LSAs) are to be advertised for this virtual IP (VIP) address by the OSPF protocol running on the NetScaler appliance. If this parameter is not set, the VIP is advertised on all areas.

Default value: -1 Minimum value = 0 Maximum value = 4294967294LU

#####ospf_lsa_type

Type of LSAs to be used by the OSPF protocol, running on the NetScaler appliance, for advertising the route for this VIP address.

Valid values: 'TYPE1', 'TYPE5', 'DISABLED'. Default value: 'DISABLED'.

#####secure_access_only

Blocks access to nonmanagement applications on this IP. This option is applicable for MIPs, SNIPs, and NSIP, and is disabled by default. Nonmanagement applications can run on the underlying NetScaler Free BSD operating system.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'. Default value: 'DISABLED'.

#####state

Enables or disables the IP address.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'. Default value: 'ENABLED'.

#####traffic_domain

Minimum value = 0 Maximum value = 4094

#####virtual_router_id

A positive integer that uniquely identifies a VMAC address for binding to this VIP address. This binding is used to set up NetScaler appliances in an active-active configuration using VRRP.

Minimum value = 1 Maximum value = 255

#####`virtual_server

Enables or disables the virtual server attribute for this IP address.

Valid options: 'yes', 'no', true, false, 'enabled', 'disabled', 'ENABLED', 'DISABLED', 'YES', 'NO', 'on', 'off', 'ON', 'OFF'. Default value: 'ENABLED'.

#####virtual_server_rhi_level

Advertise the route for the Virtual IP (VIP) address on the basis of the state of the virtual servers associated with that VIP.

'NONE' - Advertise the route for the VIP address, regardless of the state of the virtual servers associated with the address.
'ONE_VSERVER' - Advertise the route for the VIP address if at least one of the associated virtual servers is in UP state.
'ALL_VSERVER' - Advertise the route for the VIP address if all of the associated virtual servers are in UP state.
'VSVR_CNTRLD' - Advertise the route for the VIP address according to the rhi_state property value on all the associated virtual servers of the VIP address along with their states.

When Vserver rhi_state property is set to 'VSVR_CNTRLD', the following are different RHI behaviors for the VIP address on the basis of the rhi_state property on the virtual servers associated with the VIP address:

Types in this module release

netscaler_sslvserver

Configuration for SSL virtual server resource.

Parameters
ensure
name
provider

Properties
ca	CA certificate.
crlcheck	The state of the CRL check parameter. (Mandatory/Optional). Possible values = Mandatory, Optional
ocspcheck	The state of the OCSP check parameter. (Mandatory/Optional). Possible values = Mandatory, Optional
skipcaname	The flag is used to indicate whether this particular CA certificate's CA_Name needs to be sent to the SSL client while requesting for client certificate in a SSL handshake.
snicert	The name of the CertKey. Use this option to bind Certkey(s) which will be used in SNI processing.

Providers
rest

netscaler_lbvserver_rewritepolicy_binding

Manage a binding between a loadbalancing vserver and a rewrite policy.

Parameters
ensure
name	lbvserver_name/policy_name
provider

Properties
bind_point	Bind point to which to bind the policy.
goto_expression	Expression specifying the priority of the next policy which will get evaluated if the current policy rule evaluates to TRUE
invoke_policy_label	Label of policy to invoke if the bound policy evaluates to true.
invoke_vserver_label	Label of vserver to invoke if the bound policy evaluates to true.
priority	The priority of the policy binding. Min = 1 Max = 65536

Providers
rest

netscaler_lbvserver

Manage Load Balanced VServer on the NetScaler appliance.

Parameters
ensure
name
provider

Properties
appflow_logging
authentication
authentication_401
authentication_fqdn	Fully qualified domain name (FQDN) of the authentication virtual server to which the user must be redirected for authentication. Make sure that the Authentication parameter is set to ENABLED.
authentication_profile_name	Name of the authentication profile to be used when authentication is turned on.
authentication_virtual_server_name	Name of an authentication virtual server with which to authenticate users.
backup_persistence_timeout	Time period for which backup persistence is in effect. Minimum value: 2 Maximum value: 1440
backup_virtual_server	Name of the backup virtual server to which to forward requests if the primary virtual server goes DOWN or reaches its spillover threshold.
bypass_aaaa
cacheable
client_timeout	Idle time, in seconds, after which a client connection is terminated. Maximum value: 31536000
comment	Any comments that you might want to associate with the virtual server.
connection_failover	Mode in which the connection failover feature must operate for the virtual server. After a failover, established TCP connections and UDP packet flows are kept active and resumed on the secondary appliance. Clients remain connected to the same servers. Available settings function as follows: STATEFUL - The primary appliance shares state information with the secondary appliance, in real time, resulting in some runtime processing overhead. STATELESS - State information is not shared, and the new primary appliance tries to re-create the packet flow on the basis of the information contained in the packets it receives. DISABLED - Connection failover does not occur.
cookie_name	Use this parameter to specify the cookie name for COOKIE peristence type. It specifies the name of cookie with a maximum of 32 characters. If not specified, cookie name is internally generated.
data_length	Length of the token to be extracted from the data segment of an incoming packet, for use in the token method of load balancing. The length of the token, specified in bytes, must not be greater than 24 KB. Applicable to virtual servers of type TCP. Minimum value: 1 Maximum value: 100
data_offset	Offset to be considered when extracting a token from the TCP payload. Applicable to virtual servers, of type TCP, using the token method of load balancing. Must be within the first 24 KB of the TCP payload. Maximum value: 25400
database_specific_lb
db_profile_name	Name of the DB profile whose settings are to be applied to the virtual server.
disable_primary_on_down
dns64
down_state_flush
health_threshold	Threshold in percent of active services below which vserver state is made down. If this threshold is 0, vserver state will be up even if one bound service is up. Minimum value: 0 Maximum value: 100
http_profile_name	Name of the HTTP profile whose settings are to be applied to the virtual server.
icmp_virtual_server_response	How the NetScaler appliance responds to ping requests received for an IP address that is common to one or more virtual servers. Available settings function as follows: If set to PASSIVE on all the virtual servers that share the IP address, the appliance always responds to the ping requests. If set to ACTIVE on all the virtual servers that share the IP address, the appliance responds to the ping requests if at least one of the virtual servers is UP. Otherwise, the appliance does not respond. If set to ACTIVE on some virtual servers and PASSIVE on the others, the appliance responds if at least one virtual server with the ACTIVE setting is UP. Otherwise, the appliance does not respond. Note: This parameter is available at the virtual server level. A similar parameter, ICMP Response, is available at the IP address level, for IPv4 addresses of type VIP. To set that parameter, use the add ip command in the CLI or the Create IP dialog box in the GUI.
ip_address	IPv4 or IPv6 address to assign to the virtual server.
ip_mask	IP mask, in dotted decimal notation, for the IP Pattern parameter. Can have leading or trailing non-zero octets (for example, 255.255.240.0 or 0.0.255.255). Accordingly, the mask specifies whether the first n bits or the last n bits of the destination IP address in a client request are to be matched with the corresponding bits in the IP pattern. The former is called a forward mask. The latter is called a reverse mask.
ip_pattern	IP address pattern, in dotted decimal notation, for identifying packets to be accepted by the virtual server. The IP Mask parameter specifies which part of the destination IP address is matched against the pattern. Mutually exclusive with the IP Address parameter. For example, if the IP pattern assigned to the virtual server is 198.51.100.0 and the IP mask is 255.255.240.0 (a forward mask), the first 20 bits in the destination IP addresses are matched with the first 20 bits in the pattern. The virtual server accepts requests with IP addresses that range from 198.51.96.1 to 198.51.111.254. You can also use a pattern such as 0.0.2.2 and a mask such as 0.0.255.255 (a reverse mask). If a destination IP address matches more than one IP pattern, the pattern with the longest match is selected, and the associated virtual server processes the request. For example, if virtual servers vs1 and vs2 have the same IP pattern, 0.0.100.128, but different IP masks of 0.0.255.255 and 0.0.224.255, a destination IP address of 198.51.100.128 has the longest match with the IP pattern of vs1. If a destination IP address matches two or more virtual servers to the same extent, the request is processed by the virtual server whose port number matches the port number in the request.
layer2_parameters
lb_method	Load balancing method. The available settings function as follows: ROUNDROBIN - Distribute requests in rotation, regardless of the load. Weights can be assigned to services to enforce weighted round robin distribution. LEASTCONNECTION (default) - Select the service with the fewest connections. LEASTRESPONSETIME - Select the service with the lowest average response time. LEASTBANDWIDTH - Select the service currently handling the least traffic. LEASTPACKETS - Select the service currently serving the lowest number of packets per second. CUSTOMLOAD - Base service selection on the SNMP metrics obtained by custom load monitors. LRTM - Select the service with the lowest response time. Response times are learned through monitoring probes. This method also takes the number of active connections into account. Also available are a number of hashing methods, in which the appliance extracts a predetermined portion of the request, creates a hash of the portion, and then checks whether any previous requests had the same hash value. If it finds a match, it forwards the request to the service that served those previous requests. Following are the hashing methods: URLHASH - Create a hash of the request URL (or part of the URL). DOMAINHASH - Create a hash of the domain name in the request (or part of the domain name). The domain name is taken from either the URL or the Host header. If the domain name appears in both locations, the URL is preferred. If the request does not contain a domain name, the load balancing method defaults to LEASTCONNECTION. DESTINATIONIPHASH - Create a hash of the destination IP address in the IP header. SOURCEIPHASH - Create a hash of the source IP address in the IP header. TOKEN - Extract a token from the request, create a hash of the token, and then select the service to which any previous requests with the same token hash value were sent. SRCIPDESTIPHASH - Create a hash of the string obtained by concatenating the source IP address and destination IP address in the IP header. SRCIPSRCPORTHASH - Create a hash of the source IP address and source port in the IP header. CALLIDHASH - Create a hash of the SIP Call-ID header.
lb_method_hash_length	Number of bytes to consider for the hash value used in the URLHASH and DOMAINHASH load balancing methods. Minimum value = 1 Maximum value = 4096
lb_method_ipv6_mask_length	Number of bits to consider in an IPv6 destination or source IP address, for creating the hash that is required by the DESTINATIONIPHASH and SOURCEIPHASH load balancing methods. Minimum value = 1 Maximum value = 128
lb_method_netmask	IPv4 subnet mask to apply to the destination IP address or source IP address when the load balancing method is DESTINATIONIPHASH or SOURCEIPHASH. Minimum length = 1
listen_policy	Default syntax expression identifying traffic accepted by the virtual server. Can be either an expression (for example, CLIENT.IP.DST.IN_SUBNET(192.0.2.0/24) or the name of a named expression. In the above example, the virtual server accepts all requests whose destination IP address is in the 192.0.2.0/24 subnet.
listen_priority	Integer specifying the priority of the listen policy. A higher number specifies a lower priority. If a request matches the listen policies of more than one virtual server the virtual server whose listen policy has the highest priority (the lowest priority number) accepts the request. Maximum value: 101
macmode_retain_vlan
max_autoscale_members	Maximum number of members expected to be present when vserver is used in Autoscale. Maximum value: 5000
min_autoscale_members	Minimum number of members expected to be present when vserver is used in Autoscale. Maximum value: 5000
mssql_server_version	For a load balancing virtual server of type MSSQL, the Microsoft SQL Server version. Set this parameter if you expect some clients to run a version different from the version of the database. This setting provides compatibility between the client-side and server-side connections by ensuring that all communication conforms to the server's version. Valid options: 70, 2000, 2000SP1, 2005, 2008, 2008R2, 2012.
mysql_character_set	Character set that the virtual server advertises to clients.
mysql_protocol_version	MySQL protocol version that the virtual server advertises to clients.
mysql_server_capabilities	Server capabilities that the virtual server advertises to clients.
mysql_server_version	MySQL server version string that the virtual server advertises to clients.
net_profile_name	Name of the network profile to associate with the virtual server. If you set this parameter, the virtual server uses only the IP addresses in the network profile as source IP addresses when initiating connections with servers.
new_service_request_increment_interval	Interval, in seconds, between successive increments in the load on a new service or a service whose state has just changed from DOWN to UP. A value of 0 (zero) specifies manual slow start. Maximum value: 3600
new_service_request_rate	Number of requests, or percentage of the load on existing services, by which to increase the load on a new service at each interval in slow-start mode. A non-zero value indicates that slow-start is applicable. A zero value indicates that the global RR startup parameter is applied. Changing the value to zero will cause services currently in slow start to take the full traffic as determined by the LB method. Subsequently, any new services added will use the global RR factor.
new_service_request_unit	Units in which to increment load at each interval in slow-start mode. Possible values = PER_SECOND, PERCENT
oracle_server_version	Oracle server version. Valid options: 10G, 11G.
persist_avp_no	Persist AVP number for Diameter Persistency. In case this AVP is not defined in Base RFC 3588 and it is nested inside a Grouped AVP, define a sequence of AVP numbers (max 3) in order of parent to child. So say persist AVP number X is nested inside AVP Y which is nested in Z, then define the list as Z Y X Minimum value: 1
persistence_backup	Backup persistence type for the virtual server. Becomes operational if the primary persistence mechanism fails. Valid options: SOURCEIP, NONE.
persistence_ipv4_mask	Persistence mask for IP based persistence types, for IPv4 virtual servers.
persistence_ipv6_mask_length	Persistence mask for IP based persistence types, for IPv6 virtual servers. Minimum value: 1 Maximum value: 128
persistence_timeout	Time period for which a persistence session is in effect. Maximum value: 1440
persistence_type	Type of persistence for the virtual server. Available settings function as follows: SOURCEIP - Connections from the same client IP address belong to the same persistence session. COOKIEINSERT - Connections that have the same HTTP Cookie, inserted by a Set-Cookie directive from a server, belong to the same persistence session. SSLSESSION - Connections that have the same SSL Session ID belong to the same persistence session. CUSTOMSERVERID - Connections with the same server ID form part of the same session. For this persistence type, set the Server ID (CustomServerID) parameter for each service and configure the Rule parameter to identify the server ID in a request. RULE - All connections that match a user defined rule belong to the same persistence session. URLPASSIVE - Requests that have the same server ID in the URL query belong to the same persistence session. The server ID is the hexadecimal representation of the IP address and port of the service to which the request must be forwarded. This persistence type requires a rule to identify the server ID in the request. DESTIP - Connections to the same destination IP address belong to the same persistence session. SRCIPDESTIP - Connections that have the same source IP address and destination IP address belong to the same persistence session. CALLID - Connections that have the same CALL-ID SIP header belong to the same persistence session. RTSPSID - Connections that have the same RTSP Session ID belong to the same persistence session.
port	Port number for the virtual server.
priority_queuing
process_local
push
push_label_expression	Expression for extracting a label from the server's response. Can be either an expression or the name of a named expression.
push_multiple_clients
push_virtual_server_name	Name of the load balancing virtual server, of type PUSH or SSL_PUSH, to which the server pushes updates received on the load balancing virtual server that you are configuring.
range	Number of IP addresses that the appliance must generate and assign to the virtual server. The virtual server then functions as a network virtual server, accepting traffic on any of the generated IP addresses. The IP addresses are generated automatically, as follows: For a range of n, the last octet of the address specified by the IP Address parameter increments n-1 times. If the last octet exceeds 255, it rolls over to 0 and the third octet increments by 1. Note: The Range parameter assigns multiple IP addresses to one virtual server. To generate an array of virtual servers, each of which owns only one IP address, use brackets in the IP Address and Name parameters to specify the range. For example: add lb vserver my_vserver[1-3] HTTP 192.0.2.[1-3] 80 Minimum value: 1 Maximum value: 254
recursion_available
redirect_port_rewrite
redirect_url	URL to which to redirect traffic if the virtual server becomes unavailable. WARNING! Make sure that the domain in the URL does not match the domain specified for a content switching policy. If it does, requests are continuously redirected to the unavailable virtual server.
redirection_mode	Redirection mode for load balancing. Available settings function as follows: IP - Before forwarding a request to a server, change the destination IP address to the server's IP address. MAC - Before forwarding a request to a server, change the destination MAC address to the server's MAC address. The destination IP address is not changed. MAC-based redirection mode is used mostly in firewall load balancing deployments. IPTUNNEL - Perform IP-in-IP encapsulation for client IP packets. In the outer IP headers, set the destination IP address to the IP address of the server and the source IP address to the subnet IP (SNIP). The client IP packets are not modified. Applicable to both IPv4 and IPv6 packets. TOS - Encode the virtual server's TOS ID in the TOS field of the IP header. You can use either the IPTUNNEL or the TOS option to implement Direct Server Return (DSR).
response_rule	Default syntax expression specifying which part of a server's response to use for creating rule based persistence sessions (persistence type RULE). Can be either an expression or the name of a named expression. Example: HTTP.RES.HEADER("setcookie").VALUE(0).TYPECAST_NVLIST_T('=',';').VALUE("server1").
rhi_state	Route Health Injection (RHI) functionality of the NetSaler appliance for advertising the route of the VIP address associated with the virtual server. When Vserver RHI Level (RHI) parameter is set to VSVR_CNTRLD, the following are different RHI behaviors for the VIP address on the basis of RHIstate (RHI STATE) settings on the virtual servers associated with the VIP address: If you set RHI STATE to PASSIVE on all virtual servers, the NetScaler ADC always advertises the route for the VIP address. If you set RHI STATE to ACTIVE on all virtual servers, the NetScaler ADC advertises the route for the VIP address if at least one of the associated virtual servers is in UP state. If you set RHI STATE to ACTIVE on some and PASSIVE on others, the NetScaler ADC advertises the route for the VIP address if at least one of the associated virtual servers, whose RHI STATE set to ACTIVE, is in UP state.
rtsp_natting
rule	Expression, or name of a named expression, against which traffic is evaluated. Written in the classic or default syntax. Note: Maximum length of a string literal in the expression is 255 characters. A longer string can be split into smaller strings of up to 255 characters each, and the smaller strings concatenated with the + operator. For example, you can create a 500-character string as follows: '"<string of 255 characters>" + "<string of 245 characters>"' The following requirements apply only to the NetScaler CLI: If the expression includes one or more spaces, enclose the entire expression in double quotation marks. If the expression itself includes double quotation marks, escape the quotations by using the character. Alternatively, you can use single quotation marks to enclose the rule, in which case you do not have to escape the double quotation marks.
service_type	Protocol used by the service (also called the service type). Valid options: HTTP, FTP, TCP, UDP, SSL, SSL_BRIDGE, SSL_TCP, DTLS, NNTP, DNS, DHCPRA, ANY, SIP_UDP, DNS_TCP, RTSP, PUSH, SSL_PUSH, RADIUS, RDP, MYSQL, MSSQL, DIAMETER, SSL_DIAMETER, TFTP, ORACLE.
sessionless
skip_persistency	This argument decides the behavior incase the service which is selected from an existing persistence session has reached threshold. Valid options: Bypass, ReLb, None.
spillover_backup_action	Action to be performed if spillover is to take effect, but no backup chain to spillover is usable or exists. Valid options: DROP, ACCEPT, REDIRECT.
spillover_method	Type of threshold that, when exceeded, triggers spillover. Available settings function as follows: CONNECTION - Spillover occurs when the number of client connections exceeds the threshold. DYNAMICCONNECTION - Spillover occurs when the number of client connections at the virtual server exceeds the sum of the maximum client (Max Clients) settings for bound services. Do not specify a spillover threshold for this setting, because the threshold is implied by the Max Clients settings of bound services. BANDWIDTH - Spillover occurs when the bandwidth consumed by the virtual server's incoming and outgoing traffic exceeds the threshold. HEALTH - Spillover occurs when the percentage of weights of the services that are UP drops below the threshold. For example, if services svc1, svc2, and svc3 are bound to a virtual server, with weights 1, 2, and 3, and the spillover threshold is 50%, spillover occurs if svc1 and svc3 or svc2 and svc3 transition to DOWN. NONE - Spillover does not occur.
spillover_persistence
spillover_persistence_timeout	Timeout for spillover persistence, in minutes. Minimum value: 2 Maximum value: 1440
spillover_threshold	Threshold at which spillover occurs. Specify an integer for the CONNECTION spillover method, a bandwidth value in kilobits per second for the BANDWIDTH method (do not enter the units), or a percentage for the HEALTH method (do not enter the percentage symbol). Minimum value: 1 Maximum value: 4294967287
state
sure_connect
tcp_profile_name	Name of the TCP profile whose settings are to be applied to the virtual server.
tos_id	TOS ID of the virtual server. Applicable only when the load balancing redirection mode is set to TOS. Minimum value: 1 Maximum value: 63
traffic_domain	Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0. Minimum value: 0 Maximum value: 4094
vip_header_name	Name for the inserted header. The default name is vip-header.
virtual_server_ip_port_insertion	Insert an HTTP header, whose value is the IP address and port number of the virtual server, before forwarding a request to the server. The format of the header is : _, where vipHeader is the name that you specify for the header. If the virtual server has an IPv6 address, the address in the header is enclosed in brackets ([ and ]) to separate it from the port number. If you have mapped an IPv4 address to a virtual server's IPv6 address, the value of this parameter determines which IP address is inserted in the header, as follows: VIPADDR - Insert the IP address of the virtual server in the HTTP header regardless of whether the virtual server has an IPv4 address or an IPv6 address. A mapped IPv4 address, if configured, is ignored. V6TOV4MAPPING - Insert the IPv4 address that is mapped to the virtual server's IPv6 address. If a mapped IPv4 address is not configured, insert the IPv6 address. OFF - Disable header insertion.

Providers
rest

netscaler_sslkeyfile

Properties
source	URL specifying the protocol, host, and path, including file name, to the key file to be imported.

netscaler_servicegroup

Configuring a service group enables you to manage a group of services as easily as a single service. For example, if you enable or disable any option, such as compression, health monitoring or graceful shutdown, for a service group, the option gets enabled for all the members of the service group.

Parameters
ensure
graceful_shutdown
name
provider

Properties
appflow_logging
autoscale_mode	Auto scale option for a servicegroup.
cache_type	Cache type supported by the cache server.
cacheable
client_idle_timeout	Time, in seconds, after which to terminate an idle client connection. Max = 31536000
client_ip
client_ip_header	Name for the HTTP header whose value must be set to the IP address of the client. Used with the Client IP parameter. If you set the Client IP parameter, and you do not specify a name for the header, the appliance uses the header name specified for the global Client IP Header parameter (the cipHeader parameter in the set ns param CLI command or the Client IP Header parameter in the Configure HTTP Parameters dialog box at System > Settings > Change HTTP parameters). If the global Client IP Header parameter is not specified, the appliance inserts a header with the name "client-ip."
client_keepalive
comments	Any information about the object.
down_state_flush
health_monitoring
http_compression	Enable compression for the specified service.
http_profile	Name of the HTTP profile that contains HTTP configuration settings for the service group.
max_clients	Maximum number of simultaneous open connections to the service. Max = 4294967294
max_requests	Maximum number of requests that can be sent on a persistent connection to the service. Note: Connection requests beyond this value are rejected. Max = 65535
maximum_bandwidth	Maximum bandwidth, in Kbps, allocated to the service. Max = 4294967287
member_port	The port for the service group members. Only valid when autoscale_mode is POLICY.
monitor_threshold	Minimum sum of weights of the monitors that are bound to this service. Used to determine whether to mark a service as UP or DOWN. Max = 65535
net_profile	Network profile for the service group.
protocol	Protocol in which data is exchanged with the service group. Required.
server_idle_timeout	Time, in seconds, after which to terminate an idle server connection. Max = 31536000
state
sure_connect
surge_protection
tcp_buffering
tcp_profile	Name of the TCP profile that contains TCP configuration settings for the service group.
traffic_domain_id
use_client_ip
use_proxy_port

Providers
rest

netscaler_servicegroup_lbmonitor_binding

Manage a binding between a servicegroup and a loadbalancing monitor.

Parameters
ensure
name	servicegroup_name/lbmonitor_name
provider

Properties
passive
state
weight	Weight to assign to the monitor-servicegroup binding. When a monitor is UP, the weight assigned to its binding with the servicegroup determines how much the monitor contributes toward keeping the health of the servicegroup above the value configured for the Monitor Threshold parameter. `Min = 1 Max = 100`

Providers
rest

netscaler_feature

netscaler_responderpolicylabel

Manage basic netscaler responder action objects.

Parameters
ensure
name
provider

Properties
comments	Any comments to preserve information about this responder policy label.
type	Type of responses sent by the policies bound to this policy label.

Providers
rest

netscaler_route

Configuration for route resource. It is worth noting, even though the api documentation allows you to update a route, the ui or api will not let you

Parameters
ensure
name
provider

Properties
advertise
cost1	Positive integer used by the routing algorithms to determine preference for using this route. The lower the cost, the higher the preference. Minimum value = 0 Maximum value = 65535
distance	Administrative distance of this route, which determines the preference of this route over other routes, with same destination, from different routing protocols. A lower value is preferred. Default value: 1 Minimum value = 0 Maximum value = 255
monitor	Name of the monitor, of type ARP or PING, configured on the NetScaler appliance to monitor this route. Minimum length = 1
msr
protocol	Routing protocol used for advertising this route. Default value: ADV_ROUTE_FLAGS Possible values = OSPF, ISIS, RIP, BGP
td	Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0. Minimum value = 0 Maximum value = 4094
weight	Positive integer used by the routing algorithms to determine preference for this route over others of equal cost. The lower the weight, the higher the preference. Default value: 1 Minimum value = 1 Maximum value = 65535

Providers
rest

netscaler_rewriteglobal

Activates the specified rewrite policy for all requests sent to the NetScaler appliance.

Parameters
ensure
name	Name of the rewrite policy.
provider

Properties
connection_type	Type of invocation when invoking a vserver. Available settings function as follows: `* Request - Forward the request to the specified request virtual server. * Response - Forward the response to the specified response virtual server. This property is not applicable for use in conjunction with invoking a Policy Label.`
goto_expression	Expression specifying the priority of the next policy which will get evaluated if the current policy rule evaluates to TRUE.
invoke_policy_label	Label of policy to invoke if the bound policy evaluates to true.
invoke_vserver_label	Label of lbvserver to invoke if the bound policy evaluates to true.
priority	Specifies the priority of the policy. Min = 1 Max = 2147483647

Providers
rest

netscaler_lbvserver_servicegroup_binding

netscaler_sslocspresponder

Properties
url	URL of the OCSP responder.

netscaler_servicegroup_member

Manage a member of a servicegroup.

Parameters
ensure
name	servicegroup_name/server_name:server_port
provider

Properties
state
weight	Weight to assign to the servers in the service group. Specifies the capacity of the servers relative to the other servers in the load balancing configuration. The higher the weight, the higher the percentage of requests sent to the service. `Min = 1 Max = 100`

Providers
rest

netscaler_snmpalarm

Manage basic netscaler network IP objects.

Parameters
ensure
name	Name of the SNMP alarm.
provider

Properties
alarm_threshold	Value for the high threshold. The NetScaler appliance generates an SNMP trap message when the value of the attribute associated with the alarm is greater than or equal to the specified high threshold value.
logging
normal_threshold	Value for the normal threshold. A trap message is generated if the value of the respective attribute falls to or below this value after exceeding the high threshold.
severity	Severity level assigned to trap messages generated by this alarm. The severity levels are, in increasing order of severity, Informational, Warning, Minor, Major, and Critical. Possible values = Critical, Major, Minor, Warning, Informational
state
time_interval	Interval, in seconds, at which the NetScaler appliance generates SNMP trap messages when the conditions specified in the SNMP alarm are met. Can be specified for the following alarms: SYNFLOOD, HA-VERSION-MISMATCH, HA-SYNC-FAILURE, HA-NO-HEARTBEATS, HA-BAD-SECONDARY-STATE, CLUSTER-NODE-HEALTH, CLUSTER-NODE-QUORUM, CLUSTER-VERSION-MISMATCH, PORT-ALLOC-FAILED and APPFW traps. Default trap time intervals: SYNFLOOD and APPFW traps = 1sec, PORT-ALLOC-FAILED = 3600sec(1 hour), Other Traps = 86400sec(1 day). Default value: 1

Providers
rest

netscaler_rewritepolicylabel

Manage basic netscaler rewrite policy label objects.

Parameters
ensure
name
provider

Properties

Properties
comments	Any comments to preserve information about this rewrite policy label.
transform_name	Types of transformations allowed by the policies bound to the label. The following types are supported: `* http_req - HTTP requests * http_res - HTTP responses * othertcp_req - Non-HTTP TCP requests * othertcp_res - Non-HTTP TCP responses * url - URLs * text - Text strings * clientless_vpn_req - NetScaler clientless VPN requests * clientless_vpn_res - NetScaler clientless VPN responses * sipudp_req - SIP requests * sipudp_res - SIP responses * diameter_req - DIAMETER requests * diameter_res - DIAMETER responses.`

comments

Any comments to preserve information about this rewrite policy label.

transform_name

Types of transformations allowed by the policies bound to the label. The following types are supported:

* http_req - HTTP requests 
* http_res - HTTP responses 
* othertcp_req - Non-HTTP TCP requests 
* othertcp_res - Non-HTTP TCP responses 
* url - URLs 
* text - Text strings 
* clientless_vpn_req - NetScaler clientless VPN requests 
* clientless_vpn_res - NetScaler clientless VPN responses 
* sipudp_req - SIP requests 
* sipudp_res - SIP responses 
* diameter_req - DIAMETER requests 
* diameter_res - DIAMETER responses.

Providers
rest

netscaler_file

Allows the uploading of a file to the Netscaler. only accepts names of .cert .key and *.txt. Currently this file is uploaded to /nsconfig/

Parameters
content	File content, this will be encoded to Base64
ensure
name
provider

Properties
encoding	Encoding type of the file content. Only accepts BASE64

Providers
rest

netscaler_responderglobal

Activates the specified responder policy for all requests sent to the NetScaler appliance.

Parameters
ensure
name	Name of the responder policy.
provider

Properties
goto_expression	Expression specifying the priority of the next policy which will get evaluated if the current policy rule evaluates to TRUE.
invoke_policy_label	Label of policy to invoke if the bound policy evaluates to true.
invoke_vserver_label	Label of lbvserver to invoke if the bound policy evaluates to true.
priority	Specifies the priority of the policy. `Min = 1 Max = 2147483647`

Providers
rest

netscaler_cspolicylabel_cspolicy_binding

Manage a binding between a content switching vserver and a content switching policy.

Parameters
ensure
name	cspolicylabel_name/cspolicy_name
provider

Properties
goto_expression	Expression specifying the priority of the next policy which will get evaluated if the current policy rule evaluates to TRUE
invoke_policy_label	Label of policy to invoke if the bound policy evaluates to true.
priority	Specifies the priority of the policy.
target_lbvserver	The virtual server name to which content will be switched.

Providers
rest

netscaler_cspolicy

Manage basic netscaler cs policy objects.

Parameters
ensure
name
provider

Properties
action	Name of the cs action to perform if the request matches this cs policy.
domain	The domain name. The string value can range to 63 characters.
expression	Expression, or name of a named expression, against which traffic is evaluated. Written in the classic or default syntax.
log_action	Name of the messagelog action to use for requests that match this policy.
url	URL string that is matched with the URL of a request. Can contain a wildcard character. Specify the string value in the following format: [[prefix] [*]][.suffix].

Providers
rest

netscaler_responderaction

Manage basic netscaler responder action objects.

Parameters
ensure
name
provider

Properties
bypass_safety_check
comments	Any information about the responder action.
expression	Expression specifying what to respond with. Typically a URL for redirect policies or a default-syntax expression.
type	Type of responder action.

Providers
rest

netscaler_csvserver_responderpolicy_binding

Manage a binding between a content switching vserver and a responder policy.

Parameters
ensure
name	csvserver_name/policy_name
provider

Properties
goto_expression	Expression specifying the priority of the next policy which will get evaluated if the current policy rule evaluates to TRUE
invoke_policy_label	Label of policy to invoke if the bound policy evaluates to true.
invoke_vserver_label	Label of vserver to invoke if the bound policy evaluates to true.
priority	The priority of the policy binding. Min = 1 Max = 2147483647

Providers
rest

netscaler_group_user_binding

netscaler_responderpolicy

Manage basic netscaler responder policy objects.

Parameters
ensure
name
provider

Properties
action	Name of the responder action to perform if the request matches this responder policy.
appflow_action	AppFlow action to invoke for requests that match this policy.
comments	Any type of information about this responder policy.
expression	Default syntax expression that the policy uses to determine whether to respond to the specified request.
log_action	Name of the messagelog action to use for requests that match this policy.
undefined_result_action	Action to perform if the result of policy evaluation is undefined

Providers
rest

netscaler_sslcertkey

Configuration for Imported Certfile resource

Parameters
ensure
name
provider

Properties
bundle
certificate_filename	Name of and, optionally, path to the X509 certificate file that is used to form the certificate-key pair. If you use the netscaler_file resource you will need a full path eg /nsconfig/server.cert. This may throw an error the first time you apply the manifest
certificate_format	Input format of the certificate and the private-key files. The two formats supported by the appliance are: PEM - Privacy Enhanced Mail DER - Distinguished Encoding
fipskey	Name of the FIPS key that was created inside the Hardware Security Module (HSM) of a FIPS appliance, or a key that was imported into the HSM.
key_filename	Name of and, optionally, path to the private-key file that is used to form the certificate-key pair. If you use the netscaler_file resource you will need a full path eg /nsconfig/server.key. This may throw an error the first time you apply the manifest
linkcertkeyname	Name of the Certificate Authority certificate-key pair to which to link a certificate-key pair.
nodomaincheck
notificationperiod	Time, in number of days, before certificate expiration, at which to generate an alert that the certificate is about to expire.
notify_when_expires
passplain	Pass phrase used to encrypt the private-key. Required when adding an encrypted private-key in PEM format.
password

Providers
rest

netscaler_rewritepolicy

Manage basic netscaler rewrite policy objects.

Parameters
ensure
name
provider

Properties
action	Rewrite action to be used by the policy.
comments	Comments associated with this rewrite policy.
expression	Expression to be used by rewrite policy. It has to be a boolean PI rule expression.
log_action	The log action associated with the rewrite policy
undefined_result_action	A rewrite action, to be used by the policy when the rule evaluation turns out to be undefined. The undef action can be NOREWRITE, RESET or DROP

Providers
rest

netscaler_vlan

Manage basic netscaler network IP objects.

Parameters
ensure
name	A positive integer that uniquely identifies a VLAN. Minimum value = 1 Maximum value = 4094
provider

Properties
alias_name	A name for the VLAN. Must begin with a letter, a number, or the underscore symbol, and can consist of from 1 to 31 letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at sign (@), equals (=), colon (:), and underscore (_) characters. You should choose a name that helps identify the VLAN. However, you cannot perform any VLAN operation by specifying this name instead of the VLAN ID. Maximum length = 31
ipv6_dynamic_routing
maximum_transmission_unit	Specifies the maximum transmission unit (MTU), in bytes. The MTU is the largest packet size, excluding 14 bytes of ethernet header and 4 bytes of crc, that can be transmitted and received over this VLAN. Default value: 0 Minimum value = 500 Maximum value = 9216

Providers
rest

netscaler_ntpserver

Manage netscaler NTP server objects.

Parameters
ensure
name	IP address or fully qualified domain name of the NTP server.
provider

Properties
auto_key
key	Key to use for encrypting authentication fields. All packets sent to and received from the server must include authentication fields encrypted by using this key. To require authentication for communication with the server, you must set either the value of this parameter or the autokey parameter. Minimum value = 1 Maximum value = 65534
maximum_poll_interval	Maximum time after which the NTP server must poll the NTP messages. In seconds, expressed as a power of 2. Minimum value = 4 Maximum value = 17
minimum_poll_interval	Minimum time after which the NTP server must poll the NTP messages. In seconds, expressed as a power of 2. Minimum value = 4 Maximum value = 17
preferred_ntp_server

Providers
rest

netscaler_csvserver

Manage Content Switching VServer on the NetScaler appliance.

Parameters
ensure
name
provider
purge_bindings

Properties
appflow_logging
authentication
authentication_401
authentication_fqdn	FQDN of authentication vserver
authentication_profile_name	Name of the authentication profile to be used when authentication is turned on.
authentication_virtual_server_name	Name of authentication vserver
backup_virtual_server	The backup virtual server for content switching.
cacheable
case_sensitive
client_timeout	Client timeout in seconds. Maximum value: 31536000
comment	Comments associated with this virtual server.
db_profile_name	Name of the DB profile.
default_lbvserver	The virtual server name to which content will be switched. This is a special case, where the binding to the lbvserver is created when the csvserver is created
disable_primary_on_down
down_state_flush
http_profile_name	Name of the HTTP profile.
icmp_virtual_server_response	Can be active or passive. Valid options: PASSIVE, ACTIVE.
ip_address	The new IP address of the virtual server.
ip_mask	The IP Mask of the virtual server IP Pattern
ip_pattern	The IP Pattern of the virtual server.
layer2_parameters
listen_policy	Use this parameter to specify the listen policy for CS Vserver. The string can be either an existing expression name (configured using add policy expression command) or else it can be an in-line expression with a maximum of 1499 characters.
listen_priority	Use this parameter to specify the priority for listen policy of CS Vserver. Maximum value: 100
mssql_server_version	The version of the MSSQL server. Valid options: 70, 2000, 2000SP1, 2005, 2008, 2008R2.
mysql_character_set	The character set returned by the mysql vserver.
mysql_protocol_version	The protocol version returned by the mysql vserver.
mysql_server_capabilities	The server capabilities returned by the mysql vserver.
mysql_server_version	The server version string returned by the mysql vserver.
net_profile_name	The name of the network profile.
oracle_server_version	Oracle server version. Valid options: 10G, 11G.
port	A port number for the virtual server. Minimum value: 1
precedence	The precedence on the content switching virtual server between rule-based and URL-based policies. The default precedence is set to RULE. If the precedence is configured as RULE, the incoming request is applied against the content switching policies created with the -rule argument. If none of the rules match, then the URL in the request is applied against the content switching policies created with the -url option. For example, this precedence can be used if certain client attributes (such as a specific type of browser) need to be served different content and all other clients can be served from the content distributed among the servers. If the precedence is configured as URL, the incoming request URL is applied against the content switching policies created with the -url option. If none of the policies match, then the request is applied against the content switching policies created with the -rule option. Also, this precedence can be used if some content (such as images) is the same for all clients, but other content (such as text) is different for different clients. In this case, the images will be served to all clients, but the text will be served to specific clients based on specific attributes, such as Accept-Language. Valid options: RULE, URL.
push
push_label_expression	Use this parameter to specify the expression to extract the label in response from server. The string can be either a named expression (configured using add policy expression command) or else it can be an in-line expression with a maximum of 63 characters.
push_multiple_clients
push_virtual_server_name	The lb vserver of type PUSH/SSL_PUSH to which server pushes the updates received on the client facing non-push lb vserver.
range	An IP address range. Minimum value: 1 Maximum value: 254
redirect_port_rewrite
redirect_url	The redirect URL for content switching.
rhi_state	A host route is injected according to the setting on the virtual servers If set to PASSIVE on all the virtual servers that share the IP address, the appliance always injects the hostroute. If set to ACTIVE on all the virtual servers that share the IP address, the appliance injects even if one virtual server is UP. * If set to ACTIVE on some virtual servers and PASSIVE on the others, the appliance, injects even if one virtual server set to ACTIVE is UP. Valid options: PASSIVE, ACTIVE
rtsp_natting
service_type	The service type of the virtual server. Valid options: HTTP, SSL, TCP, FTP, RTSP, SSL_TCP, UDP, DNS, SIP_UDP, ANY, RADIUS, RDP, MYSQL, MSSQL, DIAMETER, SSL_DIAMETER.
spillover_backup_action	Action to be performed if spillover is to take effect, but no backup chain to spillover is usable or exists. Valid options: DROP, ACCEPT, REDIRECT
spillover_method	The spillover factor. When traffic on the main virtual server reaches this threshold, additional traffic is sent to the backupvserver. Valid options: CONNECTION, DYNAMICCONNECTION, BANDWIDTH, HEALTH, NONE.
spillover_persistence
spillover_persistence_timeout	The spillover persistency entry timeout. Minimum value: 2 Maximum value: 1440
spillover_threshold	If the spillover method is set to CONNECTION or DYNAMICCONNECTION, this value is treated as the maximum number of connections a virtual server will handle before spillover takes place. If the spillover method is set to BANDWIDTH, this value is treated as the amount of incoming and outgoing traffic (in Kbps) a vserver will handle before spillover takes place. Minimum value: 1 Maximum value: 4294967287
state
state_update
tcp_profile_name	The name of the TCP profile.
traffic_domain	Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0. Minimum value = 0 Maximum value = 4094
vip_header_name	Name of virtual server IP and port header, for use with the VServer IP Port Insertion parameter. Minimum length = 1
virtual_server_ip_port_insertion	The virtual IP and port header insertion option for the vserver. VIPADDR - Header contains the vserver's IP address and port number without any translation. OFF - The virtual IP and port header insertion option is disabled. V6TOV4MAPPING - Header contains the mapped IPv4 address that corresponds to the IPv6 address of the vserver and the port number. An IPv6 address can be mapped to a user-specified IPv4 address using the set ns ip6 command.

Providers
rest

netscaler_nshostname

Manage netscaler NTP server objects.

Parameters
ensure
name	Host name for the NetScaler appliance.
provider

Properties
ownernode	ID of the cluster node for which you are setting the hostname. Can be configured only through the cluster IP address. Minimum value = 0 Maximum value = 31

Providers
rest

netscaler_rewriteaction

Manage basic netscaler rewrite action objects.

Parameters
ensure
name
provider

Properties
bypass_safety_check
comments	Comments associated with this rewrite action.
content_expression	Default syntax expression that specifies the content to insert into the request or response at the specified location, or that replaces the specified string. Applicable for the following types: INSERT_HTTP_HEADER, INSERT_SIP_HEADER, REPLACE, INSERT_BEFORE, INSERT_AFTER, REPLACE_ALL, INSERT_BEFORE_ALL, INSERT_AFTER_ALL.
pattern	Pattern to be used for INSERT_BEFORE_ALL, INSERT_AFTER_ALL, REPLACE_ALL, DELETE_ALL action types.
refine_search	refineSearch expressions specifies how the selected HTTP data can further be refined. These expression always starts with the 'Extend(m,n)' operation. Where 'm' specifies number of bytes to the left of selected data and 'n' specifies number of bytes to the right of selected data. refineSearch expression are only allowed on body based expression and for actions of type 1) REPLACE_ALL 2) INSERT_AFTER_ALL 3) DELETE_ALL 4) INSERT_BEFORE_ALL. This can accelerate search using regular expression. For example if we need to find all the urls from www.zippo.com in a response body. Rather than writing a regular expression to search this url pattern we can search for 'zippo' pattern first and then extend the search space by some bytes and finally check for prefix 'www.zippo.com'. The rewrite command might look like: add rewrite action act1 delete_all 'http.res.body(10000)' -pattern "zippo" -refineSearch "extend(10,10).regex_select(re%<www.zippo.com[^>].*>%)" Maximum length of the input expression is 8191. Maximum size of string that can be used inside the expression is 1499.
search	search expression takes the followin 5 argumens to use the appropriate methods to search in the specified body or header: text(string) - example: -search text("hello") regex(reregular exp) - example: -search regex(re/^hello/) xpath(xpxpath expression) - example: -search xpath(xp%/a/b%) xpath_json(xpxpath expression) - example: -search xpath_json(xp%/a/b%) xpath_json_search takes xpath expression as argument but operates on json file instead of xml file. patset(patset) - example: -search patset("patset1") search expression are allowed on actions of type 1) REPLACE_ALL 2) INSERT_AFTER_ALL 3) DELETE_ALL 4) INSERT_BEFORE_ALL. search is a super set of pattern. It is advised to use search over pattern.
target_expression	Default syntax expression that specifies which part of the request or response to rewrite.
type	Type of rewrite action. It can be: (replace\|insert_http_header\|delete_http_header\|corrupt_http_header\|insert_before\|insert_after\|delete\|replace_http_res). For each action type the and are defined below. o insert_http_header: Will insert a HTTP header. <target_expression> = header name. <content_expression> = header value specified as a compound text expression. o insert_sip_header: Will insert a SIP header. <target_expression> = header name. <content_expression> = header value specified as a compound text expression. o delete_http_header: Will delete all occurrence of HTTP header. <target_expression> = header name. o delete_sip_header: Will delete all occurrence of SIP header. <target_expression> = header name. o corrupt_http_header: Will corrupt all occurrence of HTTP header. <target_expression> = header name. o corrupt_sip_header: Will corrupt all occurrence of SIP header. <target_expression> = header name. o replace: Will replace the target text reference with the value specified in attr. <target_expression> = Advanced text expression <content_expression> = Compound text expression o insert_before: Will insert the value specified by attr before the target text reference. <target_expression> = Advanced text expression <content_expression> = Compound text expression o insert_after: Will insert the value specified by attr after the target text reference. <target_expression> = Advanced text expression <content_expression> = Compound text expression o delete: Delete the target text reference. <target_expression> = Advanced text expression o replace_http_res: Replace the http response with value specified in target. <target_expression> = Compound text expression o replace_sip_res: Replace the SIP response with value specified in target. <target_expression> = Compound text expression o replace_all: Replaces all occurrence of the pattern in the text provided in the target with the text provided in the stringBuilderExpr, with a string defined in the -pattern argument or -search argument. For example, you can replace all occurences of abcd with -pattern efgh. <target_expression> = text in a request or a response, for example http.req.body(1000) <content_expression> = Compound text expression -pattern <expression> = string constant, for example -pattern efgh or -search text("efgh") o insert_before_all: Will insert the value specified by stringBuilderExpr before all the occurrence of pattern in the target text reference. <target_expression> = Advanced text expression <content_expression> = Compound text expression -pattern <expression> = string constant or advanced regular expression or -search regex(<regular expression>) or -search text(string constant) o insert_after_all: Will insert the value specified by stringBuilderExpr after all the occurrence of pattern in the target text reference. <target_expression> = Advanced text expression <content_expression> = Compound text expression -pattern <expression> = string constant or advanced regular expression or -search regex(<regular expression>) or -search text(string constant) o delete_all: Delete all the occurrence of pattern in the target text reference. <target_expression> = Advanced text expression -pattern <expression> = string constant or advanced regular expression or -search regex(<regular expression>) or -search text(string constant)

Providers
rest

Apache License
                           Version 2.0, January 2004
                        http://www.apache.org/licenses/

   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

   1. Definitions.

      "License" shall mean the terms and conditions for use, reproduction,
      and distribution as defined by Sections 1 through 9 of this document.

      "Licensor" shall mean the copyright owner or entity authorized by
      the copyright owner that is granting the License.

      "Legal Entity" shall mean the union of the acting entity and all
      other entities that control, are controlled by, or are under common
      control with that entity. For the purposes of this definition,
      "control" means (i) the power, direct or indirect, to cause the
      direction or management of such entity, whether by contract or
      otherwise, or (ii) ownership of fifty percent (50%) or more of the
      outstanding shares, or (iii) beneficial ownership of such entity.

      "You" (or "Your") shall mean an individual or Legal Entity
      exercising permissions granted by this License.

      "Source" form shall mean the preferred form for making modifications,
      including but not limited to software source code, documentation
      source, and configuration files.

      "Object" form shall mean any form resulting from mechanical
      transformation or translation of a Source form, including but
      not limited to compiled object code, generated documentation,
      and conversions to other media types.

      "Work" shall mean the work of authorship, whether in Source or
      Object form, made available under the License, as indicated by a
      copyright notice that is included in or attached to the work
      (an example is provided in the Appendix below).

      "Derivative Works" shall mean any work, whether in Source or Object
      form, that is based on (or derived from) the Work and for which the
      editorial revisions, annotations, elaborations, or other modifications
      represent, as a whole, an original work of authorship. For the purposes
      of this License, Derivative Works shall not include works that remain
      separable from, or merely link (or bind by name) to the interfaces of,
      the Work and Derivative Works thereof.

      "Contribution" shall mean any work of authorship, including
      the original version of the Work and any modifications or additions
      to that Work or Derivative Works thereof, that is intentionally
      submitted to Licensor for inclusion in the Work by the copyright owner
      or by an individual or Legal Entity authorized to submit on behalf of
      the copyright owner. For the purposes of this definition, "submitted"
      means any form of electronic, verbal, or written communication sent
      to the Licensor or its representatives, including but not limited to
      communication on electronic mailing lists, source code control systems,
      and issue tracking systems that are managed by, or on behalf of, the
      Licensor for the purpose of discussing and improving the Work, but
      excluding communication that is conspicuously marked or otherwise
      designated in writing by the copyright owner as "Not a Contribution."

      "Contributor" shall mean Licensor and any individual or Legal Entity
      on behalf of whom a Contribution has been received by Licensor and
      subsequently incorporated within the Work.

   2. Grant of Copyright License. Subject to the terms and conditions of
      this License, each Contributor hereby grants to You a perpetual,
      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
      copyright license to reproduce, prepare Derivative Works of,
      publicly display, publicly perform, sublicense, and distribute the
      Work and such Derivative Works in Source or Object form.

   3. Grant of Patent License. Subject to the terms and conditions of
      this License, each Contributor hereby grants to You a perpetual,
      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
      (except as stated in this section) patent license to make, have made,
      use, offer to sell, sell, import, and otherwise transfer the Work,
      where such license applies only to those patent claims licensable
      by such Contributor that are necessarily infringed by their
      Contribution(s) alone or by combination of their Contribution(s)
      with the Work to which such Contribution(s) was submitted. If You
      institute patent litigation against any entity (including a
      cross-claim or counterclaim in a lawsuit) alleging that the Work
      or a Contribution incorporated within the Work constitutes direct
      or contributory patent infringement, then any patent licenses
      granted to You under this License for that Work shall terminate
      as of the date such litigation is filed.

   4. Redistribution. You may reproduce and distribute copies of the
      Work or Derivative Works thereof in any medium, with or without
      modifications, and in Source or Object form, provided that You
      meet the following conditions:

      (a) You must give any other recipients of the Work or
          Derivative Works a copy of this License; and

      (b) You must cause any modified files to carry prominent notices
          stating that You changed the files; and

      (c) You must retain, in the Source form of any Derivative Works
          that You distribute, all copyright, patent, trademark, and
          attribution notices from the Source form of the Work,
          excluding those notices that do not pertain to any part of
          the Derivative Works; and

      (d) If the Work includes a "NOTICE" text file as part of its
          distribution, then any Derivative Works that You distribute must
          include a readable copy of the attribution notices contained
          within such NOTICE file, excluding those notices that do not
          pertain to any part of the Derivative Works, in at least one
          of the following places: within a NOTICE text file distributed
          as part of the Derivative Works; within the Source form or
          documentation, if provided along with the Derivative Works; or,
          within a display generated by the Derivative Works, if and
          wherever such third-party notices normally appear. The contents
          of the NOTICE file are for informational purposes only and
          do not modify the License. You may add Your own attribution
          notices within Derivative Works that You distribute, alongside
          or as an addendum to the NOTICE text from the Work, provided
          that such additional attribution notices cannot be construed
          as modifying the License.

      You may add Your own copyright statement to Your modifications and
      may provide additional or different license terms and conditions
      for use, reproduction, or distribution of Your modifications, or
      for any such Derivative Works as a whole, provided Your use,
      reproduction, and distribution of the Work otherwise complies with
      the conditions stated in this License.

   5. Submission of Contributions. Unless You explicitly state otherwise,
      any Contribution intentionally submitted for inclusion in the Work
      by You to the Licensor shall be under the terms and conditions of
      this License, without any additional terms or conditions.
      Notwithstanding the above, nothing herein shall supersede or modify
      the terms of any separate license agreement you may have executed
      with Licensor regarding such Contributions.

   6. Trademarks. This License does not grant permission to use the trade
      names, trademarks, service marks, or product names of the Licensor,
      except as required for reasonable and customary use in describing the
      origin of the Work and reproducing the content of the NOTICE file.

   7. Disclaimer of Warranty. Unless required by applicable law or
      agreed to in writing, Licensor provides the Work (and each
      Contributor provides its Contributions) on an "AS IS" BASIS,
      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
      implied, including, without limitation, any warranties or conditions
      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
      PARTICULAR PURPOSE. You are solely responsible for determining the
      appropriateness of using or redistributing the Work and assume any
      risks associated with Your exercise of permissions under this License.

   8. Limitation of Liability. In no event and under no legal theory,
      whether in tort (including negligence), contract, or otherwise,
      unless required by applicable law (such as deliberate and grossly
      negligent acts) or agreed to in writing, shall any Contributor be
      liable to You for damages, including any direct, indirect, special,
      incidental, or consequential damages of any character arising as a
      result of this License or out of the use or inability to use the
      Work (including but not limited to damages for loss of goodwill,
      work stoppage, computer failure or malfunction, or any and all
      other commercial damages or losses), even if such Contributor
      has been advised of the possibility of such damages.

   9. Accepting Warranty or Additional Liability. While redistributing
      the Work or Derivative Works thereof, You may choose to offer,
      and charge a fee for, acceptance of support, warranty, indemnity,
      or other liability obligations and/or rights consistent with this
      License. However, in accepting such obligations, You may act only
      on Your own behalf and on Your sole responsibility, not on behalf
      of any other Contributor, and only if You agree to indemnify,
      defend, and hold each Contributor harmless for any liability
      incurred by, or claims asserted against, such Contributor by reason
      of your accepting any such warranty or additional liability.

   END OF TERMS AND CONDITIONS

   APPENDIX: How to apply the Apache License to your work.

      To apply the Apache License to your work, attach the following
      boilerplate notice, with the fields enclosed by brackets "{}"
      replaced with your own identifying information. (Don't include
      the brackets!)  The text should be enclosed in the appropriate
      comment syntax for the file format. We also recommend that a
      file or class name and description of purpose be included on the
      same "printed page" as the copyright notice for easier
      identification within third-party archives.

   Copyright {yyyy} {name of copyright owner}

   Licensed under the Apache License, Version 2.0 (the "License");
   you may not use this file except in compliance with the License.
   You may obtain a copy of the License at

       http://www.apache.org/licenses/LICENSE-2.0

   Unless required by applicable law or agreed to in writing, software
   distributed under the License is distributed on an "AS IS" BASIS,
   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
   See the License for the specific language governing permissions and
   limitations under the License.

Parameters
ensure
name	lbvserver_name/servicegroup_name
provider

Modules

Discover

Contribute

Puppet

Premium features

Downloads

Resources

About Forge

Getting Started

netscaler

Support the Puppet Community by contributing to this module

Version information

This version is compatible with:

Start using this module

Documentation

netscaler_lbvserver_responderpolicy_binding

netscaler_lbvserver_rewritepolicy_binding

Parameters

ensure

goto_expression

invoke_policy_label

invoke_vserver_label

bind_point

Types in this module release

netscaler_sslvserver

netscaler_lbvserver_rewritepolicy_binding

netscaler_lbvserver

netscaler_sslkeyfile

netscaler_servicegroup

netscaler_servicegroup_lbmonitor_binding

netscaler_feature

netscaler_responderpolicylabel

netscaler_route

netscaler_rewriteglobal

netscaler_lbvserver_servicegroup_binding

netscaler_sslocspresponder

netscaler_servicegroup_member

netscaler_snmpalarm

netscaler_rewritepolicylabel

netscaler_file

netscaler_responderglobal

netscaler_cspolicylabel_cspolicy_binding

netscaler_cspolicy

netscaler_responderaction

netscaler_csvserver_responderpolicy_binding

netscaler_group_user_binding

netscaler_responderpolicy

netscaler_sslcertkey

netscaler_rewritepolicy

netscaler_vlan

netscaler_ntpserver

netscaler_csvserver

netscaler_nshostname

netscaler_rewriteaction

Supported Release 1.2.0

Summary

Features

Fixes

Supported Release 1.1.2

2015-08-18 - Supported Release 1.1.1

Summary

2015-07-29 - Supported Release 1.1.0

Summary

Features/Improvements

2015-06-09 - Supported Release 1.0.1

Summary

2015-05-26 - Supported Release 1.0.0

Summary

`ensure`

`goto_expression`

`invoke_policy_label`

`invoke_vserver_label`

`bind_point`