Forge Home

Modules

Puppet

Resources

PuppetEcosystemPuppet CommunityUpdates

lokkit

Use lokkit to manage the iptables firewall. More convenient than working with iptables directly.
Project URLRSS FeedReport issues

27,784 downloads

24,791 latest version

3.5 quality score

We run a couple of automated
scans to help you access a
module's quality. Each module is
given a score based on how well
the author has formatted their
code and documentation and
modules are also checked for
malware using VirusTotal.

Please note, the information below
is for guidance only and neither of
these methods should be considered
an endorsement by Puppet.

Support the Puppet Community by contributing to this module

You are welcome to contribute to this module by suggesting new features, currency updates, or fixes. Every contribution is valuable to help ensure that the module remains compatible with the latest Puppet versions and continues to meet community needs. Complete the following steps:

  1. Review the module’s contribution guidelines and any licenses. Ensure that your planned contribution aligns with the author’s standards and any legal requirements.
  2. Fork the repository on GitHub, make changes on a branch of your fork, and submit a pull request. The pull request must clearly document your proposed change.

For questions about updating the module, contact the module’s author.

Version information

  • 0.5.0 (latest)
  • 0.2.0
  • 0.1.3
  • 0.1.0
  • 0.0.1
released Jul 17th 2014

Start using this module

  • r10k or Code Manager
  • Bolt
  • Manual installation
  • Direct download

Add this module to your Puppetfile:

mod 'rharrison-lokkit', '0.5.0'
Learn more about managing modules with a Puppetfile

Add this module to your Bolt project:

bolt module add rharrison-lokkit
Learn more about using this module with an existing project

Manually install this module globally with Puppet module tool:

puppet module install rharrison-lokkit --version 0.5.0

Direct download is not typically how you would use a Puppet module to manage your infrastructure, but you may want to download the module in order to inspect the code.

Download
Tags: iptables, rhel, firewall, fedora, lokkit, system-config-firewall, centos

Documentation

rharrison/lokkit — version 0.5.0 Jul 17th 2014

lokkit

Manage iptables with lokkit. This module uses the lokkit command line tool to allow access to ports and services You can also supply a set of custom iptables rules in a file using the lokkit::custom defined type.

Note: To ensure this module will not prevent access to a node the $lokkit::params::cmd variable includes the -s ssh switch to make sure ssh access is always available.

Warning: This module will clear any existing iptables rules you already have in place. Currently it cannot be used with another means of managing iptables

Setup

You must specifically include the lokkit::clear class somewhere in your manifest since the other module classes and defines depend on it. It includes the commands to clear the firewall configuration in order to ensure you have a cleanly defined config.

You will probably want to only have lokkit clear the firewall rules periodically rather than during every Puppet run because Puppet will report changes have been applied on every run it does clear. Also because you are clearing the configuration the firewall will need to restart iptables once the specified configuration is complete. For more information on this see the documentation on the lokkit::clear class.

Classes

lokkit::clear

Clear the existing firewall configuration so that we can start from scratch changes are not applied until all lokkit defined resources have completed.

Note: The other classes and defines in this module have dependencies on Exec['lokkit_clear'] which is contained in this class. You must either include lokkit::clear in one of your manifests which will ensure the firewall configuration is cleared on every run or you can pass a value to the puppet_schedule parameter to this class to control when the firewall configuration is cleared.

Parameters

puppet_schedule

Puppet schedule defining when the lokkit configuration should be cleared. By default the automatically created 'puppet' schedule is used so that the configuration will be cleared on every run. If you only wish to ensure new configurations are applied and do not want to clear the configuration call the class using 'never' as the value for puppet_schedule. You may also pass any valid schedule that you have defined elsewhere in the catalog.

Examples

Only clear the lokkit configuration once daily during working hours.

schedule { 'daily_working_hours':
  period  => daily,
  range   => '9-17',
}

class { 'lokkit::clear':
  puppet_schedule => 'daily_working_hours',
}

Defined Types

lokkit::custom

Define iptables custom rules to apply via lokkit --custom-rules

Parameters

Warning: You may provide a value for content or source not both.

ensure

Ensure the custom rules are present (default) or absent

type

Which ip protocol the rules are written for. Either 'ipv4' or 'ipv6'

table

The iptables table to apply the rules to. The default is 'filter'. Other valid values are 'nat', 'mangle', 'raw', and 'security'.

content

String containing the content of the custom rules file.

source

The source location of a file containing the custom rules.

Examples

lokkit::custom { 'example_raw' :
  type    => 'ipv4',
  table   => 'raw',
  content => template('example/iptables-custom_raw.erb'),
}

lokkit::module

This will add or remove an iptables module from the firewall configuration.

Parameters

ensure

Should the module be present (default) or absent from the fire wall config.

module

The name of the iptables module to manage.

Examples

lokkit::module { 'puppet master' :
  ensure => 'present',
  module => 'nf_conntrack',
}

lokkit::ports

This will allow access to specific ports and protocols.

Note: This allows access for all connections to the ports. If you wish to define more fine grained access to these ports use lokkit::custom instead.

Parameters

tcpPorts

An array of ports to allow incoming TCP traffic on. Ports may be specified individually or as a range of ports. e.g. [ '8080', '9101-9103' ].

udpPorts

An array of ports to allow incoming UDP traffic on. Ports may be specified individually or as a range of ports. e.g. [ '8080', '9101-9103' ].

Examples

lokkit::ports { 'puppet master' :
  ensure    => 'present',
  tcpPorts  => [ '8140' ],
}

lokkit::ports_from_ip4

Define iptables custom rules to open ports only for specific IPv4 source networks.

Parameters

ensure

Ensure the custom rules are present (default) or absent

source_ips

An array of source IPv4 network ranges to allow traffic from on the provided ports. A network IP address (with /mask), or a plain IP address is acceptable as members of the array.

tcpPorts

An array of ports to allow incoming TCP traffic on. Ports may be specified individually or as a range of ports. e.g. ['8080', '9101-9103', '8090:8099'].

udpPorts

An array of ports to allow incoming UDP traffic on. Ports may be specified individually or as a range of ports. e.g. ['8080', '9101-9103', '8090:8099'].

Examples

lokkit::ports_from_ip4 { 'example_service_from_internal' :
  ensure     => present,
  source_ips => ['10.0.0.0/8'],
  tcpPorts   => ['8080', '9101-9103', '8090:8099'],
}

lokkit::services

This will allow access to services lokkit knows how to manage on this node.

Note: this allows access for all connections to the ports managed by the service. If you wish to define more fine grained access to these ports use lokkit::custom instead.

Parameters

services

An array of services to be allowed on this node. If nothing is provided for this parameter the default is to allow the single service provided by $name. Valid values for services to be enabled can be found by running lokkit --list-services on a node with the same OS and release as the node you will be configuring.

Examples

lokkit::services { 'apache' :
  services  => [ 'http', 'https' ],
}

TODO

  • Add unit tests
  • Blocking ICMP types
  • Interface management
  • Port forwarding
  • Removing configuration lines / ensuring they are absent
  • Migrate defined types to plugins

Currently this module is developed against RHEL and should also work with Fedora and CentOS. I don't use other distros so I'm unable to test them. I will accept pull requests for patches to support your favorite distro of choice.