Forge Home

Modules

Puppet

Resources

PuppetEcosystemPuppet CommunityUpdates

iptables

iptables management
Project URLRSS FeedReport issues

15,838 downloads

8,532 latest version

4.6 quality score

We run a couple of automated
scans to help you access a
module's quality. Each module is
given a score based on how well
the author has formatted their
code and documentation and
modules are also checked for
malware using VirusTotal.

Please note, the information below
is for guidance only and neither of
these methods should be considered
an endorsement by Puppet.

Support the Puppet Community by contributing to this module

You are welcome to contribute to this module by suggesting new features, currency updates, or fixes. Every contribution is valuable to help ensure that the module remains compatible with the latest Puppet versions and continues to meet community needs. Complete the following steps:

  1. Review the module’s contribution guidelines and any licenses. Ensure that your planned contribution aligns with the author’s standards and any legal requirements.
  2. Fork the repository on GitHub, make changes on a branch of your fork, and submit a pull request. The pull request must clearly document your proposed change.

For questions about updating the module, contact the module’s author.

Version information

  • 1.2.2 (latest)
  • 1.2.1
  • 1.2.0
  • 1.1.0
  • 1.0.1
  • 1.0.0
  • 0.9.6
  • 0.9.5
  • 0.9.4
  • 0.9.3
  • 0.9.2
  • 0.9.1
  • 0.9.0
  • 0.0.2
  • 0.0.1
released Dec 8th 2015
This version is compatible with:

Start using this module

  • r10k or Code Manager
  • Bolt
  • Manual installation
  • Direct download

Add this module to your Puppetfile:

mod 'arusso-iptables', '1.2.2'
Learn more about managing modules with a Puppetfile

Add this module to your Bolt project:

bolt module add arusso-iptables
Learn more about using this module with an existing project

Manually install this module globally with Puppet module tool:

puppet module install arusso-iptables --version 1.2.2

Direct download is not typically how you would use a Puppet module to manage your infrastructure, but you may want to download the module in order to inspect the code.

Download
Tags: iptables, security, firewall

Documentation

arusso/iptables — version 1.2.2 Dec 8th 2015

#iptables

Build Status

####Table of Contents

  1. Overview
  2. Module Description - What the module does and why it is useful
  3. Design Philosophy - Why did we decide to do things a certain way?
  4. Setup - The basics of getting started with iptables
  5. Usage - The classes and defined types available for configuration
  6. Reference

##Overview

This module allows you to manage your iptables rules through the management of the on-disk iptables configuration.

##Module Description

iptables is a widely used firewall tool found on most Linux systems. This module provides the ability to create complex iptables rulesets.

##Design Philosophy

The general philosophy of this module is to maintain pristine on-disk configurations, rather than modifying the running rules. This has some nice benefits, such as being able to add comments into your firewall rules making them easier to read in cases of debugging.

In addition, we try expose a more iptables-specific interface for our resources, making it easier to read what you're doing inside of your manifest files.

We also try hard to catch any obvious errors early, to prevent bad configurations from ever running in production.

##Setup

###Scope of Management Warning: iptables rules not managed by Puppet will be purged!

  • This module manipulates the on-disk iptables rules
  • This module can manage the iptables service (TODO)

###The Basic Concepts

The foundation of this module is understanding every rule has an order, from 000-999, and that the rules will be placed in ascending order in the specified chain.

Rules assume only three defaults -- the default table is 'filter',the default chain is 'INPUT' and the default action is 'ACCEPT'. So creating an empty rule will always result in the rule '-A INPUT -j ACCEPT' being generated in the 'filter' table.

The module also takes into account when IPv6 address are supplied, and will generate IPv6 rules accordingly. If you specify options that are only valid for IPv4, it will throw an error (hopefully a useful one -- if not, file an issue!). We'd rather throw an error and make you aware of an issue early on, then to discover later that your rule only partially applied.

##Usage

###Classes and Defined Types

####Class: iptables

The iptables module base class. This class is not generally necessary unless you you need or want to override the iptables or ip6tables file location.

Parameters within iptables:

#####iptables_file

This sets the iptables file location. If left unset, the default is /etc/sysconfig/iptables

#####ip6tables_file

This sets the ip6tables file location. If left unset, the default is /etc/sysconfig/ip6tables

####Defined Type: iptables::rule

The iptables rule defined type. This defined type does all the hard work and includes functionality for generating both iptables and ip6tables rules.

Parameters within iptables::rule:

#####action

This sets the rule target. This should be either a custom chain, or one of the built-in target's such as 'ACCEPT' or 'REJECT'. If left unset, this defaults to 'ACCEPT'

#####chain

This sets the chain the rule is declared on. If left unset, this defaults to 'INPUT'

#####comment

A comment to place above the rule in the iptables file. By default no comment is placed above the rule.

#####destination

The destination ip or hostname for a rule.

If multiple ips or hostnames are specified, either as an array or as a comma-separated string (very useful when working with hiera), the multiple rules will be created to accomodate them.

#####destination_port

The destination port for a rule.

If multiple ports are specified, either as an array or as a comma-separated string (very useful when working with hiera), the rule will gracefully handle setting the appropraite options for multiport rules.

#####incoming_interface

The incoming interface to witch the rule should be applied to. only works on the 'INPUT' chain, or any chain that is jumped to from the 'INPUT' chain.

#####log_level

Note: you must set the action parameter to the 'LOG' target for this to be effective

Sets the syslog logging priority of the rule. Must set the action parameter to the 'LOG' target for it to be effective.

#####log_prefix

Note: you must set the action parameter to the 'LOG' target for this to be effective

Sets the syslog entry prefix of the rule. Packets matching rules with this set will have their log entries prefix with this value.

#####outgoing_interface

The outgoing interface to which the rule should be applied to. Only works on the 'OUTPUT' chain, or any chain that is jumped to from the 'OUTPUT' chain.

#####order

Specifies the order of the rule in the table/chain. Valid values are 0-999. The default value is '500'.

#####protocol

The protocol the rule should match. This parameter is required when setting either the source_port or destination_port parameters.

#####raw

The value of this string will be inserted into the rule without modification just prior to the '-j TARGET' component of a rule.

#####raw_after

The value of this string will be inserted into the rule without modification just after the '-j TARGET' component of a rule.

#####reject_with

When using the built-in 'REJECT' target, this sets the '--reject-with' directive.

Due to some differences with the ICMP return codes between IPv4 and IPv6, rules using IPv4 or IPv6 specific values will be silently converted to a similar valid value for the appropriate protocol.

#####source

The source address(s) to match packets. Multiple addresses may be specified by supply an array or comma separated list of values.

#####source_port

The source port(s) to match packets. Multiple ports may be specified by supply an array or comma separated list of values.

#####state

Match packets with a particular state.

#####strict_protocol_checking

When set to true, protocols other than those baked into iptables/ip6tables must be specified by their IP protocol number.

When set to false, any protocol name can be specified that exists in /etc/protocols on the node the rule is applied on.

Default is true

Warning: puppet does not check the existance of protocols in /etc/protocols

#####table

The table this rule is placed in. This defaults to the 'filter' table.

#####to_port

When using the built-in 'REDIRECT' target on the 'nat' chain, this sets the '--to-port' directive.

#####version

The IP version of this rule. This can be one of '4' for an IPv4 rule, '6' for an IPv6 rule or '46' for both. By default, this is set to '46'

##Examples

Create a trivial 'complex' rule that:

  1. Creates a chain ADMIN in addition to the INPUT and OUTPUT chains
  2. Place incoming packets from $admin_network onto the ADMIN chain for processing
  3. Allow $admin_network to access $admin_ports
  4. Reject $admin_ports from non-Admin systems
    $admin_network = '10.0.0.0/24,2001:db8:1000::/64'
    $admin_ports = '22,636,5666'
    iptables::rule { 'allow admin ssh':
      comment          => 'Allow admin workstations to connect to admin ports',
      chain            => 'ADMIN',
      order            => '100',
      protocol         => 'tcp',
      destination_port => $admin_ports,
    }
    iptables::rule { 'SA network jumps to ADMIN chain':
      comment          => 'SA workstations should traverse the ADMIN chain',
      order            => '10',
      destination_port => $admin_ports,
      protocol         => 'tcp',
      action           => 'ADMIN',
      source           => $admin_network,
    }
    iptables::rule { 'Reject all other admin connections':
      comment          => 'Reject SSH from all other workstations',
      order            => '150',
      destination_port => $admin_ports,
      protocol         => 'tcp',
      action           => 'REJECT',
    }

Prevent hosts from sending outbound SMTP packets to unauthorized servers:

    # place some outbound restrictions
    iptables::rule { 'allow-outbound-smtp-to-authorized-servers':
      comment          => 'only allow smtp to our internal mail servers',
      order            => '500',
      destination_port => '25',
      protocol         => 'tcp',
      destination      => '10.0.10.10,10.0.10.11,2001:db8:1001::10/126',
      action           => 'ACCEPT',
      chain            => 'OUTPUT',
    }
    iptables::rule { 'restrict-outbound-smtp-to-unauthorized-servers':
      comment          => 'do not allow any further smtp outbound',
      order            => '999',
      destination_port => '25',
      protocol         => 'tcp',
      action           => 'REJECT',
      chain            => 'OUTPUT,
    }

##Reference

This section provides insight into the internal operations of the module. This information is only for reference, and is not consider to be a stable interface for using the module. As a result, this information may change periodically, even between minor version changes.

###Classes

####Class: iptables::ipv4

This class handles the setup of the iptables concat target, and the initial fragments required for iptables to operate, such as the commit line.

This class also contains variables used by classes and defines under the iptables::ipv4 namespace, such as information about builtin chains for iptables.

####Class: iptables::ipv6

This class handles the setup of the ip6tables concat target, and the initial fragments required for ip6tables to operate, such as the commit line.

This class also contains variables used by classes and defines under the iptables::ipv6 namespace, such as information about builtin chains for ip6tables.

###Defined Types

####Define: iptables::ipv4::chain

Handles setting up our iptables chain entry in our iptables file. Called by iptables::ipv4::rule exclusively.

Parameters for iptables::ipv4::chain:

#####comment

Deprecated: This parameter will be removed in a future version

a string comment to place above the chain entry in the iptables file.

#####policy:

the default policy for the chain. if not specified, the default value is 'ACCEPT'

####Define: iptables::ipv4::rule

Defined type that handles building our ipv4 rule lines, and ensuring the proper chains and tables are created as necessary.

Parameters for iptables::ipv4::rule:

#####options

a hash of options that is passed through from iptables::rule that mostly mirrors the parameters available to the iptables::rule define. parameters that do not make sense for ipv4 rules are excluded.

#####defaults

Deprecated: This parameter will be removed in a future version

a hash of options that is merged with the passed in parameters. we dont use this since we ended up making this part of the private api, so we can get rid of it.

####Define: iptables::ipv4::table

Handles setting up our iptables table entry in our iptables file. Called by iptables::ipv4::chain and iptables::ipv4 exclusively.

####Define: iptables::ipv6::chain

Handles setting up our ip6tables chain entry in our ip6tables file. Called by iptables::ipv6::rule exclusively.

Parameters for iptables::ipv6::chain:

#####comment

Deprecated: This parameter will be removed in a future version

a string comment to place above the chain entry in the ip6tables file.

#####policy:

the default policy for the chain. if not specified, the default value is 'ACCEPT'

####Define: iptables::ipv6::rule

Defined type that handles building our ipv6 rule lines, and ensuring the proper chains and tables are created as necessary.

Parameters for iptables::ipv6::rule:

#####options

a hash of options that is passed through from iptables::rule that mostly mirrors the parameters available to the iptables::rule define. parameters that do not make sense for ipv6 rules are excluded.

#####defaults

Deprecated: This parameter will be removed in a future version

a hash of options that is merged with the passed in parameters. we dont use this since we ended up making this part of the private api, so we can get rid of it.

####Define: iptables::ipv6::table

Handles setting up our ip6tables table entry in our ip6tables file. Called by iptables::ipv6::chain and iptables::ipv6 exclusively.

###Functions

####Function: format_action

Deprecation: this function will be renamed iptables_format_action in a future version

Formats our iptables action (ie. ACCEPT/REJECT/REDIRECT/etc). This function accepts a single parameter, the target of the rule. In general, passing in a target such as SOMECHAIN should return '-j SOMECHAIN'

Parameters for function format_action:

#####target

The target chain or action that signifies what should happen to the packet, should the rule match.

####Function: format_chain

Deprecation: this function will be renamed iptables_format_chain in a future version

Formats the portion of our iptables/ip6tables rule that associates a rule with a chain using the append method. For example, passing the value 'INPUT' would return '-A INPUT'.

Parameters for function format_chain:

#####chain

The name of a chain.

####Function: format_interface

####Function: format_log

####Function: format_port

####Function: format_protocol

####Function: format_reject

####Function: format_state

####Function: iptables_format_to_port

####Function: iptables_generate_rule

####Function: iptables_parse_options

####Function: iptables_prep_option

####Function: split_ip_by_version